Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
Přeložit název
NORMA vydána dne 1.12.2022
Označení normy: ASTM E1862-14(2022)
Datum vydání normy: 1.12.2022
Kód zboží: NS-1097236
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
imaging, infrared, infrared examination, infrared reflector, infrared testing, infrared thermography, nondestructive testing, radiometry, reflected temperature, temperature compensation, temperature measurement ,, ICS Number Code 17.200.10 (Heat. Calorimetry)
Significance and Use | ||
5.1?The infrared energy that is reflected by a specimen can cause measurement errors for an infrared thermographer measuring its surface temperature. Two procedures are provided for measuring and compensating for this reflected temperature error source, the Reflector Method and the Direct Method. 5.2?These procedures can be used in the field or laboratory using commonly available materials. 5.3?These procedures can be used with any infrared radiometers that have the required computer capabilities. 5.4?Due to the nature of the specimens, the repeatability and reproducibility are subjective. However, a measure of the precision of the procedures can be inferred from the results of the replicate procedures specified in 8.1.6 and 8.2.7. |
||
1. Scope | ||
1.1?This practice covers procedures for measuring and compensating for reflected temperature when measuring the surface temperature of a specimen with an infrared imaging radiometer.2 1.2?These procedures may involve use of equipment and materials in the presence of heated or electrically energized equipment, or both. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
2. Referenced Documents | ||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.