Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E176-08

Standard Terminology of Fire Standards

Automaticky přeložený název:

Standardní Terminologie požárních norem

NORMA vydána dne 1.1.2008

Jazyk
Provedení	Online zabezpečené PDF - 2 004.90 Kč Tištěné - 2 004.90 Kč
Dostupnost	SKLADEM
Cena	2004.90 Kč bez DPH
2 004.90 Kč

Informace o normě:

Označení normy: ASTM E176-08
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2008
Kód zboží: NS-42920
Počet stran: 20
Přibližná hmotnost: 60 g (0.13 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM E176-08 :

Keywords:

Heating tests, Ignition--building materials, Smoke analysis, Temperature tests, Terminology, Terminology--building materials/applications, Fire testing--building materials, Flammability, Flash point, ICS Number Code 01.040.13 (Environment and health protection. Safety (Vocabularies)), 13.220.20 (Fire protection)

Doplňující informace

Significance and Use

Definitions—Terms and related definitions given in Section 4 are intended for use uniformly and consistently in all fire test standards and in all fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards in which they appear.

Definitions of Terms Specific to This Standard:

As indicated in Section 4, terms and their definitions are intended to provide a precise understanding and interpretation of fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards in which they appear.

A specific definition of a given term is applicable to the standard or standards in which the term is described and used.

Different definitions of the same term, appearing respectively in two or more standards, are acceptable provided each one is consistent with and not in conflict with the standard definition for the same term, that is, concept.

Each standard in which a term is used in a manner specially defined (see 1.1 and Section 5) shall list the term and its description under the subheading, Definitions of Terms.

Definitions for some terms associated with fire issues and not included in Terminology E 176 are found in ISO 13943. When discrepancies exist, the definition in Terminology E 176 shall prevail.

1. Scope

1.1 This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards. Definitions of terms are special-purpose definitions that are consistent with the standard definitions but are written to ensure that a specific fire-test-response standard, fire-hazard-assessment standard, or fire-risk-assessment standard is properly understood and precisely interpreted.

Note 1—For additional information, refer to ASTM Policy on Fire Standards.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.3 This fire standard cannot be used to provide quantitative measures.

2. Referenced Documents

E2187-20a	Standard Test Method for Measuring the Ignition Strength of Cigarettes (Includes all amendments and changes 5/15/2020).
E2226-23a	Standard Practice for Application of Hose Stream (Includes all amendments and changes 1/9/2024).
E2837-23a	Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies (Includes all amendments and changes 1/1/2024).
E2886/E2886M-20	Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
E2912-17	Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
E2957-17	Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
ISO1182,	Fire Tests-Building Materials-Non-Combustibility Test
ISO13943,
E1474-22	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1509-22	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1513-93(2000)	Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1529-22	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537-22	Standard Test Method for Fire Testing of Upholstered Furniture
E1354-23	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355-23	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E2404-22	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
E2405-05	Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen (Withdrawn 2011)
E2536-21	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
E2573-19	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
E2574/E2574M-17(2021)	Standard Test Method for Fire Testing of School Bus Seat Assemblies
E2599-22	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
E2632/E2632M-20	Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
E2652-22	Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750 ?C
E1546-21	Standard Guide for Development of Fire-Hazard-Assessment Standards
E2653-23	Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories
E2688-23	Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
E2690-22	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
E2707-22	Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
E2726/E2726M-12a(2017)	Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands (Includes all amendments and changes 8/13/2018).
E1590-23	Standard Test Method for Fire Testing of Mattresses
E1623-22a	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) (Includes all amendments and changes 12/7/2022).
E2749-23a	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens (Includes all amendments and changes 1/8/2024).
E2816-20a	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems (Includes all amendments and changes 8/24/2020).
E2307-23b	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus (Includes all amendments and changes 12/21/2023).
E2230-22	Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231-21	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2257-22	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2280-21	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2335-22	Standard Guide for Laboratory Monitors
E1740-22	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
E1822-21	Standard Test Method for Fire Testing of Stacked Chairs
E1995-21	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E2032-21	Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
E2058-19	Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061-23	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067-23	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2102-21	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E906/E906M-21	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E970-23	Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E1317-19	Standard Test Method for Flammability of Surface Finishes
E1321-18	Standard Test Method for Determining Material Ignition and Flame Spread Properties
E1352-16	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies (Withdrawn 2022)
E814-23a	Standard Test Method for Fire Tests of Penetration Firestop Systems (Includes all amendments and changes 7/26/2023).
E1353-21	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture (Withdrawn 2022)
E152-81AE02	Methods of Fire Tests of Door Assemblies (Withdrawn 1995)
E162-22	Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E535-23	Standard Practice for Preparation of Fire-Test-Response Standards
E603-23	Standard Guide for Room Fire Experiments
E119-22	Standard Test Methods for Fire Tests of Building Construction and Materials
E163-84E01	Methods for Fire Tests of Window Assemblies (Withdrawn 1995)
E603-23	Standard Guide for Room Fire Experiments
E648-23	Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E800-20	Standard Guide for Measurement of Gases Present or Generated During Fires
D3675-22	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
C1313-05	Standard Specification for Sheet Radiant Barriers for Building Construction Applications
D5865-13	Standard Test Method for Gross Calorific Value of Coal and Coke
E108-20a	Standard Test Methods for Fire Tests of Roof Coverings (Includes all amendments and changes 4/17/2020).
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
C1224-22	Standard Specification for Reflective Insulation for Building Applications
E136-24	Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 ?C
E1678-21a	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis (Includes all amendments and changes 1/11/2022).

Doporučujeme:

EviNor - Řízení a aktualizace českých norem