Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM E1684-10
Standard Specification for Miniature Thermocouple Connectors
Automaticky přeložený název:
Standard Specification pro miniaturní termočlánkových konektorů
NORMA vydána dne 1.11.2010
Informace o normě:
Označení normy: ASTM E1684-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2010
Kód zboží: NS-42643
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM E1684-10 :
Keywords:
connector, contact inserts, jacks, miniature connector, plug, thermocouple, thermocouple connector, Connectors (electrical), Contact inserts, Jacks, Miniature thermocouple connectors, Plugs, Thermocouples--specifications, ICS Number Code 17.200.20 (Temperature-measuring instruments)
Doplňující informace
| 1. Scope | ||||
|
1.1 This specification covers separable single-circuit miniature thermocouple connectors with two flat pins. Connectors covered by this specification must be rated for continuous use to at least 300°F (150°C), but they may optionally be rated higher. 1.2 This specification does not cover multiple-circuit connectors, multi-pin connectors, standard size connectors, or connectors intended primarily for panel mounting. High-temperature connectors (for example, those designed for continuous use at temperatures significantly above approximately 500°F (260°C)) are not intended to be covered by this specification. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 The plug and jack may be ordered separately but many of the connector characteristics (see Table 1) are qualified as a mated pair. The requirements in this standard are applicable for the connector pair supplied by the same manufacturer. |
||||
| 2. Referenced Documents | ||||
|
Doporučujeme:
