Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní zkušební metoda pro povrchové hořlavosti materiálů Použitím sálavého tepla zdroj energie
NORMA vydána dne 10.4.2002
Označení normy: ASTM E162-02ae1
Poznámka: NEPLATNÁ
Datum vydání normy: 10.4.2002
Kód zboží: NS-42393
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
beta factor, fire-test-response standard, flame spread factor, radiant panel index, heat evolution factor, radiant heat energy, radiant panel, surface flame spread, surface flammability, ICS Number Code 13.220.50 (Fire-resistance of building materials and elements)
1. Scope | ||||||||||||||
1.1 This fire-test-response standard describes the measurement of surface flammability of materials. It is not intended for use as a basis of ratings for building code purposes (see Appendix X1). 1.2 The values stated in pound-inch units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests. This test method may involve hazardous materials, operations, and equipment. Specific information about hazard is given in Section 7. Note 1—There is no similar or equivalent ISO standard. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 17.07.2024 (Počet položek: 2 336 011)
© Copyright 2024 NORMSERVIS s.r.o.