Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
Automaticky přeložený název:
Standardní Příručka pro stavebnictví tuhé palivo Burning Zdivo Ohřívače
NORMA vydána dne 10.1.2001
Označení normy: ASTM E1602-94
Poznámka: NEPLATNÁ
Datum vydání normy: 10.1.2001
Kód zboží: NS-42321
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
brick, Contraflow, firebrick, fire clay mortar, Grundofen, Kachelofen, Kakelugn, masonry heater, mortar, refractory mortar, Russian, soapstone refractory mortar, ICS Number Code 25.180.20 (Fuel furnaces)
1. Scope | ||||||||||||||||
1.1 This guide covers the design and construction of solid fuel burning masonry heaters. It provides dimensions for site constructed masonry heater components and clearances that have been derived by experience and found to be consistent with the safe installation of those masonry heaters. 1.2 Values given in SI units are to be regarded as standard. Inch/pound units may be rounded (see IEEE/ASTM SI-10). All dimensions are nominal unless specifically stated otherwise. All clearances listed in this guide are actual dimensions. 1.3 This guide applies to the design and construction of masonry heaters built on-site with the components and materials specified herein. It does not apply to the construction/installation requirements for component systems that have been safety tested and listed. The requirements for listed masonry heater systems are specified in the manufacturer's installation instructions. 1.4 The design and construction of solid fuel burning masonry heaters shall comply with applicable building codes. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Poslední aktualizace: 18.08.2024 (Počet položek: 2 342 672)
© Copyright 2024 NORMSERVIS s.r.o.