Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
Automaticky přeložený název:
Standardní specifikace pro ESD kontrolované oděvy požadované v čistých prostorách a kontrolovaném prostředí pro vesmírnou loď pro Non-i nebezpečné operace
NORMA vydána dne 15.5.2013
Označení normy: ASTM E1549/E1549M-13
Poznámka: NEPLATNÁ
Datum vydání normy: 15.5.2013
Kód zboží: NS-42145
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
cleanroom, contamination control, electrostatic discharge, ESD, garments, spacecraft, ICS Number Code 13.340.10 (Protective clothing)
1. Scope | ||||||||||||||||||||||||||||||
1.1 This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. 1.2 The function of cleanroom garments is to contain the contaminants generated by people and to minimize contaminants from the garments. 1.3 Two types of fabrics can be selected for the garments. Both types are inherently static-dissipative materials to prevent electrical discharges that can damage sensitive hardware or initiate explosions in the presence of flammable vapors. The material specified for “hazardous environments” is flame resistant and provides additional protection to the wearer. Selection of garment design and fabric should be based on the user's needs with respect to functional and environmental requirements. 1.4 Additional, background information can be found in SD-TR-91-26 and IEST-RP-CC003.3. 1.5 This standard is intended to be in compliance with the ASTM policy on Fire Standards.1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.