Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Structural Standing Seam Steel Roof Panel Systems
Automaticky přeložený název:
Standard Specification pro Hrubé stojatá drážka ocelovou střechou panelové systémy
NORMA vydána dne 15.8.2011
Označení normy: ASTM E1514-98(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 15.8.2011
Kód zboží: NS-42024
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
anchorage, clips, coatings, construction, deflection, endlaps, environmental, exposed, exposure, fasteners, flashings, galvanized, installation, joints, loading, loads, low-sloped, metal, oil canning, panels, penetrations, ponding, roof, sealer, seismic, service life, sidelap, slope, snow, standing seam, steel, structural, superimposed, tapes, thermal, uplift, water, weathertightness: Roofing materials/applications--specifications, Roof panel systems, Standing steel roof panel systems
1. Scope | ||||||||||||||||||||||||||||||||||||||
1.1 This specification covers the design, construction, and weatherability of structural standing seam steel roof panel systems. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers. Note 1—These systems are used on both low-slope and steep-slope roof applications. They also are used with or without an underlying deck or sheathing. 1.2 The objective of this specification is to provide for the overall performance of the structural standing seam steel roof panel system as defined in 3.2.6 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide for periodic maintenance of equipment by the owner. 1.3 In addition to structural, the specifier shall evaluate other characteristics beyond the scope of this specification that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for specifier's checklist. 1.4 The specification is not intended to exclude products or systems not covered by the referenced documents. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this specification contains notes and footnotes that provide explanatory information and are not requirements of this specification. |
||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||
|
Historická
1.11.2011
Historická
1.10.2012
Historická
1.11.2009
Historická
15.2.2011
Historická
15.2.2011
Historická
15.2.2011
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 23.12.2024 (Počet položek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.