Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E1514-98

Standard Specification for Structural Standing Seam Steel Roof Panel Systems

Automaticky přeložený název:

Standardní specifikace pro Hrubé stojatá drážka ocelovou střechou panelové systémy

NORMA vydána dne 10.9.1998

Jazyk
Provedení	PDF - okamžité stažení - 1 739.60 Kč Tištěné - 1 739.60 Kč
Dostupnost	SKLADEM
Cena	1 739.60 Kč bez DPH
1 739.60 Kč

Informace o normě:

Označení normy: ASTM E1514-98
Poznámka: NEPLATNÁ
Datum vydání normy: 10.9.1998
Kód zboží: NS-42025
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM E1514-98 :

Keywords:
Roofing and waterproofing materials-steel, Roof panel systems, Standing steel roof panel systems, Structural applications-steel, roof panel systems-structural standing seam steel, spec, ICS Number Code 91.060.20 (Roofs)

Doplňující informace

1. Scope

1.1 This specification covers the design, construction, and weatherability of structural standing seam steel roof panel systems that can resist all superimposed design loads without the benefit of a supporting deck or sheathing. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers. Many of these systems are used on low-sloped roofs when installed in accordance with the manufacturer's recommendations.

1.2 The objective is to provide for the performance of the standing seam steel roof panel system as defined in 1.1 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide periodic maintenance of equipment by the owner.

1.3 In addition to structural, the specifier shall evaluate other characteristics beyond the scope of this specification, that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for designer's checklist.

1.4 The specification is not intended to exclude products or systems not covered by the referenced documents.

2. Referenced Documents

A463/A463M-22	Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
Approval Standard	for Class 1 Panel Roofs, Class Number 4471
G21-15(2021)e1	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi (Includes all amendments and changes 6/22/2021).
E1680-16(2022)	Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
E1646-95(2018)	Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1592-05(2017)	Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E631-15	Standard Terminology of Building Constructions
D3310-00(2023)	Standard Test Method for Determining Corrosivity of Adhesive Materials
D1667-22	Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
	1997 ASHRAE Handbook of Fundamentals
MBMA	Low Rise Building Systems Manual, Latest Edition

C879-03(2019)	Standard Test Methods for Release Papers Used with Preformed Tape Sealants
C765-23	Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C711-22	Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
A875/A875M-23	Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A792/A792M-23	Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A653/A653M-23	Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
S100	North American Specification for the Design of Cold-Formed Steel Structure Members

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.