Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E1473-94a(2003)

Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys (Includes all amendments And changes 8/16/2017).

Automaticky přeložený název:

Standardní zkušební metody pro chemickou analýzu nikl, kobalt , a vysoké teploty slitin

NORMA vydána dne 1.10.2003

Jazyk
Provedení	Online zabezpečené PDF - 2 661.40 Kč Tištěné - 2 661.40 Kč
Dostupnost	SKLADEM
Cena	2661.40 Kč bez DPH
2 661.40 Kč

Informace o normě:

Označení normy: ASTM E1473-94a(2003)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2003
Kód zboží: NS-41877
Počet stran: 36
Přibližná hmotnost: 108 g (0.24 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM E1473-94a(2003) :

Keywords:

atomic, absorption, chemical analysis, gravimetric, ion exchange, photometric, titration

Doplňující informace

1. Scope

1.1 These test methods describe the chemical analysis of nickel, cobalt, and high-temperature alloys having chemical compositions within the following limits:

Element	Concentration Range, %
Aluminum	0.005 to 7.00
Beryllium	0.001 to 0.05
Boron	0.001 to 1.00
Calcium	0.002 to 0.05
Carbon	0.001 to 1.10
Chromium	0.10 to 33.00
Cobalt	0.10 to 75.00
Copper	0.01 to 35.00
Iron	0.01 to 50.00
Lead	0.001 to 0.01
Magnesium	0.001 to 0.05
Manganese	0.01 to 3.0
Molybdenum	0.01 to 30.0
Niobium (Columbium)	0.01 to 6.0
Nickel	0.10 to 98.0
Nitrogen	0.001 to 0.20
Phosphorus	0.002 to 0.08
Sulfur	0.002 to 0.10
Silicon	0.01 to 5.00
Tantalum	0.005 to 1.00
Tin	0.002 to 0.10
Titanium	0.01 to 5.00
Tungsten	0.01 to 18.00
Vanadium	0.01 to 3.25
Zinc	0.001 to 0.01
Zirconium	0.01 to 2.50

1.2 The test methods in this standard are contained in the sections indicated as follows:

	Sections

Aluminum, Total by the 8-Quinolinol Gravimetric Method (0.20 to7.00 %)	62 to 69
Chromium by the Atomic Absorption Method (0.018 to 1.00 %)	100 to 109
Chromium by the Peroxydisulfate Oxidation-Titration Method(0.10 to 33.00 %)	110 to 118
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to75 %)	34 to 41
Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to5.0 %)	42 to 51
Copper by Neocuproine Photometric Method (0.010 to 10.00 %)	52 to 61
Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0 %)	127 to 134
Manganese by the Metaperiodate Photometric Method (0.05 to2.00 %)	8 to 17
Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravi-metric Method (1.5 to 30 %)	119 to 126
Molybdenum by the Photometric Method (0.01 to 1.50 %)	88 to 99
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to84.0 %)	70 to 77
Niobium by the Ion Exchange-Cupferron Gravimetric Method(0.5 to 6.0 %)	135 to 142
Silicon by the Gravimetric Method (0.05 to 5.00 %)	27 to 33
Sulfur by the Combustion-Iodate Titration Method (0.006 to0.1 %)	18 to 26
Tantalum by the Ion Exchange-Pyrogallol SpectrophotometricMethod (0.03 to 1.0%)	143 to 151
Tin by the Solvent Extraction-Atomic Absorption Method (0.002to 0.10 %)	78 to 87

1.3 Methods for the determination of several elements not included in these test methods can be found in Test Methods E 30, E 76, and E 1019.

1.4 Some of the concentration ranges given in are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E 380 are also used.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7 and in special caution and warning paragraphs throughout these test methods.

2. Referenced Documents

E1938-13(2018)	Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
E2465-23	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2594-20	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
E2823-17	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ISO 5725	Precision of Test Methods--Determination of Repeatability and Reproducibility for Inter-Laboratory Tests
E1917-13(2018)	Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
E350-23	Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1601-19	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1834-18	Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
E1835-14(2022)	Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
D1193-06(2018)	Standard Specification for Reagent Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.