Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM E1473-94a(1998)
Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní zkušební metody pro chemickou analýzu nikl, kobalt , a vysoké teploty slitin
NORMA vydána dne 10.12.1998
Informace o normě:
Označení normy: ASTM E1473-94a(1998)
Poznámka: NEPLATNÁ
Datum vydání normy: 10.12.1998
Kód zboží: NS-41876
Počet stran: 35
Přibližná hmotnost: 105 g (0.23 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM E1473-94a(1998) :
Keywords:
Aluminum content, Aluminum content-Ni/Ni alloys, total aluminum in nickel/cobalt/high temperature alloys, test,, Chemical analysis-metals/alloys, Cobalt alloys, Gravimetric method, High temperature alloys, Ion exchange, Nickel alloys-chemical analysis, Photometry, Titration, chemical analysis of nickel/cobalt/high temperature alloys, test,, Chromium content-miscellaneous metals/alloys, Chromium content-Ni/Ni alloys, Spectrophotometry-atomic absorption, Tin content-metals/alloys
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
|
1.1 These test methods describe the chemical analysis of nickel, cobalt, and high-temperature alloys having chemical compositions within the following limits: Element Concentration Range, % Aluminum 0.005 to 7.00 Beryllium 0.001 to 0.05 Boron 0.001 to 1.00 Calcium 0.002 to 0.05 Carbon 0.001 to 1.10 Chromium 0.10 to 33.00 Cobalt 0.10 to 75.00 Copper 0.01 to 35.00 Iron 0.01 to 50.00 Lead 0.001 to 0.01 Magnesium 0.001 to 0.05 Manganese 0.01 to 3.0 Molybdenum 0.01 to 30.0 Niobium (Columbium) 0.01 to 6.0 Nickel 0.10 to 98.0 Nitrogen 0.001 to 0.20 Phosphorus 0.002 to 0.08 Sulfur 0.002 to 0.10 Silicon 0.01 to 5.00 Tantalum 0.005 to 1.00 Tin 0.002 to 0.10 Titanium 0.01 to 5.00 Tungsten 0.01 to 18.00 Vanadium 0.01 to 3.25 Zinc 0.001 to 0.01 Zirconium 0.01 to 2.501.2 The test methods in this standard are contained in the sections indicated as follows: Sections Aluminum, Total by the 8-Quinolinol Gravimetric Method (0.20 to 7.00%) 2 62 to 69 Chromium by the Atomic Absorption Method (0.018 to 1.00%) 2 100 to 109 Chromium by the Peroxydisulfate Oxidation-Titration Method (0.10 to 33.00%) 2 110 to 118 Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to 75%) 2 34 to 41 Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to 5.0%) 2 42 to 51 Copper by Neocuproine Photometric Method (0.010 to 10.00%) 2 52 to 61 Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0%) 2 127 to 134 Manganese by the Metaperiodate Photometric Method (0.05 to 2.00%) 2 8 to 17 Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravi- metric Method (1.5 to 30%) 2 119 to 126 Molybdenum by the Photometric Method (0.01 to 1.50%) 2 88 to 99 Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to 84.0%) 2 70 to 77 Niobium by the Ion Exchange-Cupferron Gravimetric Method (0.5 to 6.0%) 135 to 142 Silicon by the Gravimetric Method (0.05 to 5.00%) 2 27 to 33 Sulfur by the Combustion-Iodate Titration Method (0.006 to 0.1%) 2 18 to 26 Tin by the Solvent Extraction-Atomic Absorption Method (0.002 to 0.10%) 2 78 to 871.3 Methods for the determination of several elements not included in these test methods can be found in Test Methods E30, E76, and E1019. 1.4 Some of the concentration ranges given in 1.1 are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed. 1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E380 are also used. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7 and in special caution and warning paragraphs throughout these test methods. |
||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
