Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting
Přeložit název
NORMA vydána dne 15.5.2017
Označení normy: ASTM E1306-17
Poznámka: NEPLATNÁ
Datum vydání normy: 15.5.2017
Kód zboží: NS-686374
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
arc melting, button melting, melting, remelting, sample preparation,, ICS Number Code 77.040.30 (Chemical analysis of metals)
Significance and Use | ||
5.1 This sampling practice is useful for converting material taken from ingots or other solid materials into a homogeneous solid sample suitable for direct excitation on a spark atomic emission or X-ray fluorescence spectrometer. The resultant button may itself be chipped to provide specimens for test methods requiring solutions or chips. 5.2 This practice has been used extensively for the preparation of zirconium, zirconium alloy, titanium, and titanium alloy materials, and is applicable to other reactive, refractory, ferrous and nonferrous alloys, such as cobalt, cobalt alloys, niobium, nickel, nickel alloys, steels, stainless steels, tantalum, tool steels, and tungsten. |
||
1. Scope | ||
1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wires, sponge and powdered metals. 1.1.1 This practice is also suitable for preparation of solid samples of other metals, such as steels, stainless steels, tool steels, nickel, nickel alloys, cobalt, and cobalt alloys. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 9. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
2. Referenced Documents | ||
|
Poslední aktualizace: 30.08.2024 (Počet položek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.