Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials (Includes all amendments And changes 5/21/2020).
Přeložit název
NORMA vydána dne 1.7.2014
Označení normy: ASTM E1304-97(2014)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2014
Kód zboží: NS-993827
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ICS Number Code 77.040.10 (Mechanical testing of metals)
Significance and Use | ||||||||
5.1 The fracture toughness determined by this test method characterizes the resistance of a material to fracture by a slowly advancing steady-state crack (see 3.2.5) in a neutral environment under severe tensile constraint. The state of stress near the crack front approaches plane strain, and the crack-tip plastic region is small compared with the crack size and specimen dimensions in the constraint direction. A KIv or 5.1.1 The KIv, 5.1.2 Plane-strain fracture toughness testing is unusual in that there can be no advance assurance that a valid 5.2 This test method can serve the following purposes: 5.2.1 To establish the effects of metallurgical variables such as composition or heat treatment, or of fabricating operations such as welding or forming, on the fracture toughness of new or existing materials. 5.2.2 For specifications of acceptance
and manufacturing quality control, but only when there is a sound
basis for specification of minimum KIv,
5.2.3 To provide high spatial resolution
in measuring plane strain fracture toughness variations in parent
pieces of material Note 2: The high spatial resolution is possible because of the
small allowable specimen size criterion, B ≥1.25
(1.1 This test method covers the
determination of plane-strain (chevron-notch) fracture toughnesses,
Standard Practices for Force Calibration
and Verification of Testing Machines Standard Terminology Relating to Fatigue
and Fracture Testing Standard Test Method for Linear-Elastic
Plane-Strain Fracture Toughness of Metallic Materials Standard Test Methods for Tension Testing
of Metallic Materials |
Poslední aktualizace: 30.08.2024 (Počet položek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.