Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Explosibility of Dust Clouds (Includes all amendments And changes 1/8/2020).
Automaticky přeložený název:
Standardní zkušební metoda pro výbušnosti rozvířeného prachu
NORMA vydána dne 1.12.2012
Označení normy: ASTM E1226-12a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2012
Kód zboží: NS-40934
Počet stran: 13
Přibližná hmotnost: 39 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
dust explosion, explosion pressure, ICS Number Code 13.230 (Explosion protection), 17.100 (Measurement of force, weight and pressure)
Significance and Use | ||||||||||
5.1 This test method provides a procedure for performing laboratory tests to evaluate deflagration parameters of dusts. 5.2 The data developed by this test method may be used for the purpose of sizing deflagration vents in conjunction with the nomographs and equations published in NFPA 68, ISO 6184/1, or VDI 3673. 5.3 The values obtained by this testing technique are specific to the sample tested and the method used and are not to be considered intrinsic material constants. 5.4 For dusts with low KSt-values, discrepancies have been observed between tests in 20-L and 1-m3 chambers. A strong ignitor may overdrive a 20-L chamber, as discussed in Test Method E1515 and Refs (1-3).7 1.1 Purpose. The purpose of this
test method is to provide standard test methods for characterizing
the “explosibility” of dust clouds in two ways, first by
determining if a dust is “explosible,” meaning a cloud of dust
dispersed in air is capable of propagating a deflagration, which
could cause a flash fire or explosion; or, if explosible,
determining the degree of “explosibility,” meaning the potential
explosion hazard of a dust cloud as characterized by the dust
explosibility parameters, maximum explosion pressure,
P1.2 Limitations. Results obtained by
the application of the methods of this standard pertain only to
certain combustion characteristics of dispersed dust clouds. No
inference should be drawn from such results relating to the
combustion characteristics of dusts in other forms or conditions
(for example, ignition temperature or spark ignition energy of dust
clouds, ignition properties of dust layers on hot surfaces,
ignition of bulk dust in heated environments, etc.)
1.3 Use. It is intended that results obtained by application of this test be used as elements of an explosion risk assessment that takes into account other pertinent risk factors; and in the specification of explosion prevention systems (see, for example NFPA 68, NFPA 69, and NFPA 654) when used in conjunction with approved or recognized design methods by those skilled in the art. 1.4 The values stated in SI units
are to be regarded as standard. No other units of measurement are
included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.9.2009
Historická
1.12.2012
Historická
1.10.2007
Historická
1.10.2013
Historická
1.10.2013
Historická
1.2.2007
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 23.12.2024 (Počet položek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.