Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Visible Penetrant Examination Using the Solvent-Removable Process
Automaticky přeložený název:
Standardní zkušební metoda pro viditelné penetrační vyšetření pomocí Solvent - Odnímatelný proces
NORMA vydána dne 10.6.1999
Označení normy: ASTM E1220-99
Poznámka: NEPLATNÁ
Datum vydání normy: 10.6.1999
Kód zboží: NS-40912
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
Aerosol spray applications, Black light inspection, Ceramic materials, Cold shuts, Contaminant removal, Cracking, Dwell time, Electrostatic spray application, Ferrous metals/alloys, Glass, Impurities, Laminations, Leak testing, Liquid penetrant examination, Nonferrous metals/alloys, Nonporous metallic/nonmetallic materials, Penetrant inspection, Plastics (general), Seams, Surface analysis-metals/alloys, visible penetrant examination, using solvent removal process, test
1. Scope | ||||||||||||||||||||||||||||||
1.1 This test method covers procedures for visible penetrant examination utilizing the solvent-removable process. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass. 1.2 This test method also provides a reference: 1.2.1 By which a visible penetrant examination method using the solvent-removable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications dealing with the visible, solvent-removable liquid penetrant examination of materials and parts. Agreement by the purchaser and the manufacturer regarding specific techniques is strongly recommended. 1.2.3 For use in the organization of the facilities and personnel concerned with the liquid penetrant examination. 1.3 This test method does not indicate or suggest standards for evaluation of the indications obtained. It should be noted, however, that after indications have been produced, they must be interpreted or classified and then evaluated. For this purpose there must be a separate code, specification, or a specific agreement to define the type, size, location, and direction of indications considered acceptable, and those considered unacceptable. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Notes 3, 10, and 13. |
||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Poslední aktualizace: 02.09.2024 (Počet položek: 2 345 509)
© Copyright 2024 NORMSERVIS s.r.o.