Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Industrial Platinum Resistance Thermometers
Automaticky přeložený název:
Standard Specification průmyslového Platinum odporových teploměrů
NORMA vydána dne 1.12.2014
Označení normy: ASTM E1137/E1137M-08(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2014
Kód zboží: NS-40589
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ITS-90, metal sheath, platinum resistance thermometer, PRT,, ICS Number Code 17.200.20 (Temperature-measuring instruments)
Significance and Use | ||||||||||
4.1 This specification is written to provide common terminology, resistance versus temperature characteristics, accuracy classification, and inspection requirements for a specified configuration of a typical industrial platinum resistance thermometer (PRT). 4.2 This specification may be used as part of the documentation to support negotiations for the purchase and discussion of such thermometers. |
||||||||||
1. Scope | ||||||||||
1.1 This specification covers the requirements for metal-sheathed industrial platinum resistance thermometers (PRT's) suitable for direct immersion temperature measurement. It applies to PRT's with an average temperature coefficient of resistance between 0 and 100°C of 0.385 %/°C and nominal resistance at 0°C of 100 Ω or other specified value. This specification covers PRT's suitable for all or part of the temperature range −200 to 650°C. The resistance-temperature relationship and tolerances are specified as well as physical, performance, and testing requirements. 1.2 The values of temperature in this specification are based on the International Temperature Scale of 1990 (ITS-90).1.3 The values stated in inch-pound units or SI (metric) units may be regarded separately as standard. The values stated in each system are not exact equivalents, and each system shall be independent of the other. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.5.2013
Historická
1.11.2013
Historická
1.11.2013
Historická
1.5.2011
Historická
1.5.2013
Historická
1.5.2014
Poslední aktualizace: 05.09.2024 (Počet položek: 2 346 132)
© Copyright 2024 NORMSERVIS s.r.o.