Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Compositional Analysis by Thermogravimetry
Automaticky přeložený název:
Standardní zkušební metoda pro kompoziční analýza pomocí termogravimetrie
NORMA vydána dne 1.9.2008
Označení normy: ASTM E1131-08
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2008
Kód zboží: NS-40568
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ash, combustible material, composition, compositional analysis, highly volatile matter, medium volatile matter, thermogravimetry, Handling material, Heating tests--chemicals/materials, Mass, Plastic materials, Problem solving, Thermogravimetric analysis (TGA), Volatile matter content, Ash, Carbon content, Combustible material, Composition analysis--plastics, Elastomeric materials/applications, Geometric analysis, ICS Number Code 71.040.40 (Chemical analysis)
Significance and Use | ||||||||||||||
This test method is intended for use in quality control, material screening, and related problem solving where a compositional analysis is desired or a comparison can be made with a known material of the same type. The parameters described should be considered as guidelines. They may be altered to suit a particular analysis, provided the changes are noted in the report. The proportion of the determined components in a given mixture or blend may indicate specific quality or end use performance characteristics. Particular examples include the following: Increasing soot (carbon) content of used diesel lubricating oils indicates decreasing effectiveness. Specific carbon-to-polymer ratio ranges are required in some elastomeric and plastic parts in order to achieve desired mechanical strength and stability. Some filled elastomeric and plastic products require specific inert content (for example, ash, filler, reinforcing agent, etc.) to meet performance specifications. The volatile matter, fixed carbon, and ash content of coal and coke are important parameters. The “ranking” of coal increases with increasing carbon content and decreasing volatile and hydrocarbon, (medium volatility) content. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This test method provides a general technique incorporating thermogravimetry to determine the amount of highly volatile matter, medium volatile matter, combustible material, and ash content of compounds. This test method will be useful in performing a compositional analysis in cases where agreed upon by interested parties. 1.2 This test method is applicable to solids and liquids. 1.3 The temperature range of test is typically room temperature to 1000 °C. Composition between 1 and 100 weight % of individual components may be determined. 1.4 This test method utilizes an inert and reactive gas environment. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard is related ISO 11358 but is more detailed and specific. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 05.09.2024 (Počet položek: 2 346 132)
© Copyright 2024 NORMSERVIS s.r.o.