Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D95-13e1
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (Includes all amendments And changes 11/27/2018).
Automaticky přeložený název:
Standardní zkušební metoda pro vodu s ropnými produkty a živičných nerostů destilací
NORMA vydána dne 1.5.2013
Informace o normě:
Označení normy: ASTM D95-13e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-39870
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D95-13e1 :
Keywords:
bituminous materials, distillation, petroleum products, solvent carrier liquid, water by distillation, water content, ICS Number Code 75.140 (Waxes, bituminous materials and other petroleum products)
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||
|
5.1 A knowledge of the water content of petroleum products is important in the refining, purchase, sale, and transfer of products. 5.2 The amount of water as determined by this test method (to the nearest 0.05 or 0.1 volume %, depending on the trap size used) may be used to correct the volume involved in the custody transfer of petroleum products and bituminous materials. 5.3 The allowable amount of water may be specified in contracts. |
||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This test method covers the determination of water in the range from 0 to 25 % volume in petroleum products, tars, and other bituminous materials by the distillation method. 1.2 The specific products considered
during the development of this test method are listed in Table 1.
For bituminous emulsions refer to Test Method D244. For crude oils,
refer to Test Method D4006 (API MPMS Chapter
10.2).
1.3 The values stated in SI units
are to be regarded as the standard. The values in parentheses are
for information only.
1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Apparatus for
Determination of Water by Distillation MPMS Chapter 8.1 Manual Sampling of Petroleum and
Petroleum Products (ASTM Practice ) MPMS Chapter 8.2 Automatic Sampling of Petroleum and
Petroleum Products (ASTM Practice ) MPMS Chapter 8.3 Mixing and Handling of Liquid Samples of
Petroleum and Petroleum Products (ASTM Practice ) MPMS Chapter 10.2 Determination of Water in Crude Oil by
the Distillation Method (ASTM Test Method ) MPMS Chapter 10.6 Test Method for Water and Sediment in
Fuel Oils by the Centrifuge Method (Laboratory Procedure) (ASTM
Test Method ) Standard Specification for Mineral
Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) Standard Test Methods and Practices for
Emulsified Asphalts Standard Test Method for Water and
Sediment in Fuel Oils by the Centrifuge Method (Laboratory
Procedure) Standard Test Method for Water in Crude
Oil by Distillation Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Practice for Automatic Sampling
of Petroleum and Petroleum Products (Includes all amendments and
changes 3/24/2023). Standard Practice for Mixing and Handling
of Liquid Samples of Petroleum and Petroleum Products (Includes all
amendments and changes 8/13/2019). |
Doporučujeme:
