Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022)
Automaticky přeložený název:
Standardní postupy pro identifikaci krystalických látek ve vodě tvarované vkladů rentgenová difrakce
NORMA vydána dne 1.1.2013
Označení normy: ASTM D934-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2013
Kód zboží: NS-39825
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
crystallographic examination, deposits, metal oxides, scale, x-ray diffraction, ICS Number Code 13.060.30 (Sewage water)
Significance and Use | ||||||||||||||||||
5.1 The identification of the crystalline structures in water-formed deposits assists in the determination of the deposit sources and mode of deposition. This information may lead to measures for the elimination or reduction of the water-formed deposits. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 These practices provide for X-ray diffraction analysis of powdered crystalline compounds in water-formed deposits. Two are given as follows:
1.2 Both practices yield qualitative identification of crystalline components of water-formed deposits for which X-ray diffraction data are available or can be obtained. Greater difficulty is encountered in identification when the number of crystalline components increases. 1.3 Amorphous phases cannot be identified without special treatment. Oils, greases, and most organic decomposition products are not identifiable. 1.4 The sensitivity for a given component varies with a combination of such factors as density, degree of crystallization, particle size, coincidence of strong lines of components and the kind and arrangement of the atoms of the components. Minimum percentages for identification may therefore range from 1 to 40 %. 1.5 The values stated in SI units are to be regarded as standard. The values listed in parenthesis are for information only. 1.6 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to consult and establish appropriate safety and health practices
and determine the applicability of regulatory limitations prior to
use.
Standard Specification for Woven Wire
Test Sieve Cloth and Test Sieves Standard Practices for Sampling
Water-Formed Deposits Standard Practices for Preparation and
Preliminary Testing of Water-Formed Deposits Standard Practice for Reporting Results
of Examination and Analysis of Water-Formed Deposits Standard Terminology Relating to Water
(Includes all amendments and changes 2/14/2024). Standard Specification for Reagent
Water |
Historická
15.6.2012
Historická
1.9.2012
Historická
1.9.2011
Historická
1.4.2013
Historická
1.4.2013
Historická
15.1.2008
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.