Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D926-17(2022)
Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
Přeložit název
NORMA vydána dne 1.10.2022
Informace o normě:
Označení normy: ASTM D926-17(2022)
Datum vydání normy: 1.10.2022
Kód zboží: NS-1087148
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D926-17(2022) :
Keywords:
elastic properties, flow properties, parallel plate plastometer, plasticity, plasticity and recovery, plastometer, Williams plastometer,, ICS Number Code 83.060 (Rubber)
Doplňující informace
| Significance and Use | ||||||||||
|
4.1?The plasticity number and the recovery of the test specimen are related to the flow properties and the elastic properties, respectively, and may be useful in predicting processing characteristics, such as ease of forming and extrusion characteristics. 4.1.1?In this test method, plasticity is measured in an inverse manner, as noted by the final height of the specimen. Thus, high plasticity rubbers (high degree of flow during test) are indicated by a low plasticity number. |
||||||||||
| 1. Scope | ||||||||||
|
1.1?This test method covers the determination of plasticity and recovery of unvulcanized rubber by means of the parallel plate plastometer. Uncompounded, compounded, and reclaim rubber may be tested. Note 1:?ISO 2007 and Test Method D3194 use a principle similar to this
test method although the apparatus, test conditions, and procedure
are different.
1.2?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||
| 2. Referenced Documents | ||||||||||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
