Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
Automaticky přeložený název:
Standardní zkušební metody pro flexibilní Resin potažené skleněné tkaniny a skelnou tkaninou pásky použité pro elektrické izolace
NORMA vydána dne 1.10.2006
Označení normy: ASTM D902-06
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2006
Kód zboží: NS-39681
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
breaking strength, coated glass fabric, dielectric breakdown voltage, dissipation factor, heat aging, permittivity, thermal endurance, thread count, ICS Number Code 29.035.30 (Glass and ceramic insulating materials)
Significance and Use | ||||||||||||||||||||||||
The electrical properties of resin-coated glass fabrics are affected by their temperature and moisture content. For this reason it is necessary to control these properties for a specified time immediately prior to testing in order to attain reasonably good reproducibility of test values. The time of exposure to the conditioning atmosphere must be long enough to permit the test specimen to reach a relatively stable value. Usually the moisture content of these materials has little effect on the mechanical properties. |
||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||
1.1 These test methods cover procedures for the testing of resin-coated glass fabrics and glass fabric tapes (Note 1) to be used as electrical insulation. Note 1 - Methods of testing varnished cloths and tapes are given in Methods D 295. 1.2 The warp threads in fabrics are the threads that are parallel with the length dimension as manufactured. 1.3 The procedures appear as follows: 1.4 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statement are given in 35.1.1 and 58.1. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 13.09.2024 (Počet položek: 2 429 660)
© Copyright 2024 NORMSERVIS s.r.o.