Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)Přeložit název
NORMA vydána dne 1.4.2021
Označení normy: ASTM D8368-21
Datum vydání normy: 1.4.2021
Kód zboží: NS-1024155
Počet stran: 16
Přibližná hmotnost: 48 g (0.11 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
gas chromatography, jet turbine fuel analysis, vacuum ultraviolet absorption spectroscopy,
|Significance and Use|
5.1The determination of group type composition of diesel fuel is useful for evaluating quality and expected performance. Aromatics and polyaromatics, in particular, are related to combustion characteristics, cetane number, energy content, lubricity, water solubility and exhaust emissions.
5.1.1Aromatic hydrocarbon type analysis may be useful for evaluating refinery processes.
5.1.2The ability to determine aromatics content in the presence of FAME may be useful to users of diesel fuel.
1.1This test method covers a standard procedure for the determination of group type totals of saturate, aromatic, polyaromatic, and FAME content in diesel fuel using gas chromatography and vacuum ultraviolet absorption spectroscopy detection (GC-VUV).
1.1.1Polyaromatic totals are the result of the summation of diaromatic and tri-plus aromatic group types. Aromatics are the summation of monoaromatic and polyaromatic group types. FAME content is the result of summation of individual fatty acid methyl esters.
1.2Concentrations of group type totals are determined by percent mass or percent volume. The applicable ranges are as follows:
Note 1:Applicable ranges of components and precision will ultimately be defined by an interlaboratory study.
1.3Diesel fuel containing biodiesel, (FAME, that is, fatty acid methyl esters) can be analyzed by this test method. The FAME component completely elutes from the analytical column independent of feedstock; however, interim precision is determined only with soy methyl esters. FAME content in diesel fuel can be determined by Test Methods or .
1.4Individual hydrocarbon components are not reported by this test method; however, any individual component determinations are included in the appropriate summation of the totals of saturate, aromatic, polyaromatic, monoaromatic, diaromatic, tri-plus aromatic, or FAME groups.
1.4.1Individual components are typically not baseline-separated by the procedure described in this test method, that is, some components will coelute. The coelutions are resolved at the detector using VUV absorbance spectra and deconvolution algorithms.
1.5This test method has been tested for diesel fuel, including renewable diesel fuels from hydrotreated vegetable oil (HVO) and gas to liquid (GTL) processes, and biodiesel blends; this test method may apply to other hydrocarbon streams boiling between heptane (98C) and triacontane (450C), but has not been extensively tested for such applications.
1.6UnitsThe values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Poslední aktualizace: 16.10.2021 (Počet položek: 2 534 860)
© Copyright 2021 NORMSERVIS s.r.o.