Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
Automaticky přeložený název:
Standardní praxe pro výběr Wood substrátů pro povětrnostních vlivů, vyhodnocení architektonické nátěry
NORMA vydána dne 1.6.2013
Označení normy: ASTM D7787/D7787M-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2013
Kód zboží: NS-39113
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
exposure, weathering, wood substrate, ICS Number Code 79.060.01 (Wood-based panels in general),87.040 (Paints and varnishes)
Significance and Use | ||||
5.1 Natural weathering tests can take several years and accelerated weathering evaluations often run for cycles requiring several weeks or months before obtaining useful data. Correlating wood panels selection with desired weathering performance characteristics assists a coatings experimenter in maximizing information in the desired time frame. 5.2 Because of the long time spans required for exposure testing, it is critical to plan a reliable experiment while controlling as many variables as possible. For this reason, selection of experimental panels made from representative wood species or composites, grades of lumber and surface types that are expected to be painted is very important. 5.3 This practice may be used for any types of exterior architectural coating intended for use on wood or wood composite substrate such as exterior house paints, primers, wood stains, or waterproofers. |
||||
1. Scope | ||||
1.1 This practice offers guidelines for selecting wood or wood composite substrates for the evaluation of specific weathering performance characteristics of architectural coatings such as exterior paints, primers, and deck finishes. 1.2 Procedures include selecting wood species and choosing individual wood test panels through visual examination of the wood characteristics. 1.3 This practice is intended to cover the most commonly employed wood substrates used in weathering studies of architectural coatings. It is not intended to serve as a comprehensive guide for all wood species that may be employed for the purpose of evaluating weathering performance characteristics of architectural coatings. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.4.2013
Historická
1.5.2010
Historická
1.5.2014
Historická
1.6.2008
Historická
1.4.2011
Historická
1.8.2008
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.