Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
Přeložit název
NORMA vydána dne 1.1.2021
Označení normy: ASTM D7683-21
Datum vydání normy: 1.1.2021
Kód zboží: NS-1029203
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
automated cloud point, biodiesel, cloud point, petroleum products,, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||||||||
5.1?The cloud point of petroleum products and biodiesel fuels is an index of the lowest temperature of their utility for certain applications. Wax crystals of sufficient quantity can plug filters used in some fuel systems. 5.2?Petroleum blending operations require precise measurement of the cloud point. 5.3?This test method can determine the temperature of the test specimen at which wax crystals have formed sufficiently to be observed as a cloud with a resolution of 0.1 ?C. 5.4?This test method provides results that, when corrected for bias and rounded to the next lower integer (see 12.2), have been found equivalent to Test Method D2500. 5.5?This test method determines the cloud point in a shorter time period than required by Test Method D2500. |
||||||||||
1. Scope | ||||||||||
1.1?This test method covers the determination of the cloud point of petroleum products, biodiesel, and biodiesel blends that are transparent in layers 40 mm in thickness, using an automatic instrument. 1.2?The measuring range of the apparatus is from 65 ?C to +51 ?C, however the precision statements were derived only from samples with cloud point temperatures from 50 ?C to +6 ?C. 1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||
2. Referenced Documents | ||||||||||
|
Poslední aktualizace: 30.08.2024 (Počet položek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.