ASTM D5441-98(2013)..
ASTM D7388-08(2013)..
ASTM D7577-12
ASTM D7637-10
ASTM D7638-10
ASTM D770-11
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D7666-12
Standard Specification for Triglyceride Burner Fuel
Automaticky přeložený název:
Standard Specification triglyceridu hořák
NORMA vydána dne 24.4.2012
Informace o normě:
Označení normy: ASTM D7666-12
Poznámka: NEPLATNÁ
Datum vydání normy: 24.4.2012
Kód zboží: NS-38911
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D7666-12 :
Keywords:
biofuel, boiler, cooking oil, crude glycerin, fats, fatty acid, fuel, glycerin, heating fuel, industrial burner, recycled oil, rendered animal fat, TBF, triglyceride, triglyceride fuel, used fuel, used oil, used vegetable oil, vegetable oil, yellow grease, ICS Number Code 71.080.60 (Alcohols. Ethers), 75.160.01 (Fuels in general)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers two grades of burner fuel consisting of triglycerides and naturally occurring constituents of triglycerides including monoglycerides, diglycerides, and free fatty acids and distinguished by the pour point. The grade designation (TBF) identifies them as triglyceride burner fuels. 1.2 The triglyceride burner fuels specified are intended for use in commercial or industrial air or steam-atomized fuel oil burning equipment manufactured from materials compatible with fuels having an acid number as specified in Table 1 and under various climatic and operating conditions for the purposes of heat generation. The fuels specified herein are not intended for blending with conventional fuel oils for this purpose. They are not intended for use in burners <0.32 GJ/h (0.3 × 106 BTU/h) such as residential burners or small pressure atomization burners nor are they intended for use in internal combustion engines or marine applications. Note 1—For information on the significance of the terminology and test methods used in this specification, see Appendix X1. 1.3 This specification does not address the frequency with which any particular test shall be run. 1.4 Nothing in this specification shall preclude observance of national or local regulations, which can be more restrictive. 1.5 The text of this standard references notes and footnotes that provide explanatory material and shall not be considered as requirements of the standard. The table in this standard references footnotes, and these are to be considered as requirements of the standard. 1.6 The values given in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. TABLE 1 Detailed Requirements for Triglyceride Burner Fuels
A The test methods indicated are the approved referee methods. Other acceptable methods are indicated in Section 8. B Units given in parentheses are for informational purposes only. C 1 mm2/s = 1 cSt. D Density in kg/L at 15°C multiplied by 1000 = kg/m3. E Local jurisdictions may limit the sulfur content in burner fuels. F Assumes 7.6 lb/US gal. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Podobné normy:
Historická
1.5.2013
Historická
1.10.2013
Historická
15.12.2012
Historická
1.6.2010
Historická
1.6.2010
Historická
1.11.2011
Doporučujeme:
