Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D7578-10e1 15.2.2010 náhled

Doplňující informace

ASTM D7578-10e1

Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants (Includes all amendments And changes 6/10/2015).

Automaticky přeložený název:

Standardní příručka pro požadavky na kalibraci na elementární analýzu ropných produktů a maziv

NORMA vydána dne 15.2.2010

Jazyk
Provedení	PDF - okamžité stažení - 2 109.30 Kč Tištěné - 2 109.30 Kč
Dostupnost	SKLADEM
Cena	2 109.30 Kč bez DPH
2 109.30 Kč

Informace o normě:

Označení normy: ASTM D7578-10e1
Poznámka: NEPLATNÁ
Datum vydání normy: 15.2.2010
Kód zboží: NS-38758
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D7578-10e1 :

Keywords:

atomic absorption spectrometry, balances, calibration, calibration standard, check standard, electrometric methods, ICP-AES methods, lubricants, petroleum products, photometric methods, reference material, temperature measuring devices, timers, verification, XRF methods, ICS Number Code 75.080 (Petroleum products in general), 75.100 (Lubricants, industrial oils and related products)

Doplňující informace

Significance and Use

Crude oil, petroleum, petroleum products, additives, biofuels, and lubricants are routinely analyzed for their elemental content such as chlorine, nitrogen, hydrogen, phosphorus, sulfur, and various metals using a variety of analytical techniques. Some of these methods require little to no method calibration; some others require only simple one step calibration; while others require elaborate calibration routine before the product is analyzed for its elemental content.

Fairly often it can be shown that the round robin results by a co-operator are all biased with respect to those from other laboratories. Presumably, the failure to follow good laboratory practices and instructions in the test methods can be a causal factor of such errors. A further consequence is an unnecessarily large reproducibility estimate or the data being dropped from the study as an outlier.

Another cause of such discrepancies could be different or inadequate calibration practice used in the laboratory. Most test methods spell out the calibration requirements but often do not quote the frequency required letting the laboratories use good laboratory practices for this task. Thus, uniform practice for instrument calibration would be beneficial in standardizing the test procedures and obtaining consistent results across the laboratories.

Committee D02 has already issued standard practices for uniform sample preparation (D7455), standard operating procedures for ICP-AES (D7260) and XRF (D7343) as well as standard quality assurance protocol (D6792). This guide should be considered as a continuing effort on behalf of this subcommittee to achieve standardized practices in all parts of an analytical sequence.

1. Scope

1.1 This guide covers different ways by which the test methods used for elemental analysis of petroleum product and lubricant samples are calibrated before the sample analysis.

1.2 Uniform practice for test method calibration is beneficial in standardizing the procedures, and obtaining consistent results across different laboratories.

1.3 This guide includes only the basic steps for generally encountered instrument types. Anything out of the ordinary may require special procedures. See individual test methods for instructions to handle such situations.

1.4 This guide is not a substitute for a thorough understanding of the actual test method to be used, caveats it contains, and additional instrument preparation that may be required.

1.5 The user should not expand the scope of the test methods to materials or concentrations outside the scope of the test methods being used.

1.6 This guide should also be applicable to sample preparation of non-petroleum based bio-fuels for elemental analysis. Work is underway on these aspects in Subcommittee D02.03. As more information becomes available, it will be added to this standard.

1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D6595-22	Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
D6667-21	Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
D6728-16(2021)	Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
D6732-04(2020)	Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
D6792-23c	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories (Includes all amendments and changes 12/7/2023).
D6920-13	Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)
D7039-15a(2020)	Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry (Includes all amendments and changes 6/11/2020).
D7040-04(2020)	Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D7041-16(2021)	Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
D7622-20	Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
D7623-20	Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
D7691-23	Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7740-20	Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
D7328-23	Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
D7751-16(2021)	Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
D7757-22	Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
E77-14(2021)	Standard Test Method for Inspection and Verification of Thermometers
E319-85(1997)	Standard Practice for the Evaluation of Single-Pan Mechanical Balances
E898-20	Standard Practice for Calibration of Non-Automatic Weighing Instruments
NIST Special Publication 260-136	Definitions of Terms and Modes Used at NIST for Value-Assignment of Reference Materials for Chemical Measurements
ISO Guide 30	Terms and definitions used in connection with reference materials
D129-18	Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
D445-23	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D482-19	Standard Test Method for Ash from Petroleum Products
D808-16	Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021)
D874-23	Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
D892-23	Standard Test Method for Foaming Characteristics of Lubricating Oils
D1018-11	Standard Test Method for Hydrogen In Petroleum Fractions
D3605-22	Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
D3831-22	Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
D4045-19	Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
D4046-14	Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
D3237-22	Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D4047-18	Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
D4294-21	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4628-23	Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
D4629-17	Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
D4927-20	Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
D4929-22	Standard Test Method for Determination of Organic Chloride Content in Crude Oil
D4951-14(2019)	Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D5056-22	Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
D5059-21	Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
D5184-22	Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
D5185-18	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5291-21	Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
D5384-14(2019)	Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
D5453-19a	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence (Includes all amendments and changes 8/13/2019).
D5600-22	Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5622-17	Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
D5708-15(2020)e1	Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry (Includes all amendments and changes 7/8/2020).
D3246-15	Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
D3120-08(2019)	Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D3228-22	Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
D3230-19	Standard Test Method for Salts in Crude Oil (Electrometric Method)
D1091-11	Standard Test Methods for Phosphorus in Lubricating Oils and Additives
D3231-24	Standard Test Method for Phosphorus in Gasoline
D1266-18	Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
D1318-23	Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
D1548-92e1	Test Method for Vanadium in Navy Special Fuel Oil (Withdrawn 1997)
D1552-23	Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
D1839-14	Standard Test Method for Amyl Nitrate in Diesel Fuels
D2622-21	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2784-11	Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016)
D5762-18a	Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence (Includes all amendments and changes 10/16/2018).
D5800-21	Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
D5863-22	Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
D6334-12	Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
D6443-14(2019)e1	Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure) (Includes all amendments and changes 7/9/2019).
D7111-16(2021)	Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7171-20	Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
D7212-13(2018)	Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
D7220-22	Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
D7260-20	Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
D7303-23	Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
D7318-19e1	Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration (Includes all amendments and changes 12/25/2019).
D7319-22	Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
D6445-99	Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
D6470-99(2020)	Standard Test Method for Salt in Crude Oils (Potentiometric Method)
D6481-24	Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
D4307-17(2021)	Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
D3340-07	Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013)
D3341-16	Standard Test Method for Lead in Gasoline—Iodine Monochloride Method (Withdrawn 2022)
D3348-12	Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
D7343-20	Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
D7455-19	Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.