Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Oxidation Stability of Middle Distillate Fuels´Rapid Small Scale Oxidation Test (RSSOT) (Includes all amendments and changes 12/25/2019).
Přeložit název
NORMA vydána dne 1.12.2019
Označení normy: ASTM D7545-14(2019)e1
Datum vydání normy: 1.12.2019
Kód zboží: NS-979004
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
breakpoint, diesel fuel, biodiesel, induction period, middle distillate fuels, oxidation stability, oxygen uptake,, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||||||||||||
5.1 The induction period may be used as an indication of the oxidation and storage stability of middle distillate fuel. 5.2 Compared to some other oxidation and storage stability test methods, this method uses a small sample and gives a result in a short time period. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This laboratory test method covers a quantitative determination of the stability of middle distillate fuels such as diesel fuels and heating oils, with up to 100 % biodiesel, under accelerated oxidation conditions, by an automatic instrument. Note 1: This test method is technically equivalent to test
method EN 16091
1.2 This test method is designed for products complying with Specification D975 on Diesel Fuel, Grades No. 1D and 2D; Specification D396 on Burner Fuel, Grades No. 1 and No. 2; Specification D6751 on Biodiesel, B100, and Specification D7467 on Diesel Fuel Oil, B6 to B20. 1.3 This test method measures the induction period, under specified conditions, which can be used as an indication of the oxidation and storage stability of middle distillate fuels. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 07.10.2024 (Počet položek: 2 349 940)
© Copyright 2024 NORMSERVIS s.r.o.