Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D7544-12(2017)
Standard Specification for Pyrolysis Liquid Biofuel
Přeložit název
NORMA vydána dne 1.10.2017
Informace o normě:
Označení normy: ASTM D7544-12(2017)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2017
Kód zboží: NS-800774
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D7544-12(2017) :
Keywords:
pyrolysis liquid biofuel, bio-oil, pyrolysis oil, pyoil, py-oil, bio-crude-oil, bio-fuel-oil, wood liquids, burner fuel, renewable energy, alternative energy, fuel oils, furnace oils,, ICS Number Code 75.160.20 (Liquid fuels)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||
|
1.1 This specification covers grades of pyrolysis liquid biofuel produced from biomass intended for use in various types of fuel-burning equipment under various climatic and operating conditions. These grades are described as follows: 1.1.1 Grade G is intended for use in industrial burners equipped to handle the pyrolysis liquid biofuels meeting the requirements listed for Grade G in Table 1. The pyrolysis liquid biofuel listed under Grade G in Table 1 is not intended for use in residential heaters, small commercial boilers, engines, or marine applications. 1.1.2 Grade D is intended for use in
commercial/industrial burners requiring lower solids and ash
content and which are equipped to handle the pyrolysis liquid
biofuels meeting the requirements listed for Grade D in
Table 1. The pyrolysis liquid
biofuel listed under Grade D in Table 1 is not intended for use in
residential heaters, engines, or marine applications not modified
to handle these types of fuels.
Note 1: For information on the significance of the physical,
chemical, and performance properties identified in this
specification, see Appendix
X1.
1.2 This specification is for use in contracts for the purchase of pyrolysis liquid biofuel and for guidance of consumers of this type of fuel. 1.3 Nothing in this specification should preclude observance of national or local regulations, which may be more restrictive. Note 2: The generation and dissipation of static electricity
may create problems in the handling of pyrolysis liquid biofuel.
For more information on the subject, see Guide D4865.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1 Exception—BTU units are included for information only in 3.1.5.1. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||
|
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
