Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení neexistujících a potenciální Anorganická sulfát a celkový anorganický chloridu v etanolu iontovou chromatografií za použití vodného vstřikování vzorků
NORMA vydána dne 15.9.2013
Označení normy: ASTM D7328-13
Poznámka: NEPLATNÁ
Datum vydání normy: 15.9.2013
Kód zboží: NS-38201
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aqueous injection, denatured ethanol, ethanol, existent inorganic sulfate, fuel ethanol, ion chromatography, potential sulfate, total chloride, ICS Number Code 75.160.20 (Liquid fuels)
Significance and Use | ||||||||||||||||||||
5.1 Sulfates and chlorides may be found in filter plugging deposits and fuel injector deposits. The acceptability for use of the fuel components and the finished fuels depends on the sulfate and chloride content. 5.2 Existent and potential inorganic sulfate and total chloride content, as measured by this test method, can be used as one measure of the acceptability of gasoline components for automotive spark-ignition engine fuel use. |
||||||||||||||||||||
1. Scope | ||||||||||||||||||||
1.1 This test method covers an ion chromatographic procedure for the determination of the existent inorganic and potential sulfate and total inorganic chloride content in hydrous and anhydrous denatured ethanol to be used in motor fuel applications. It is intended for the analysis of ethanol samples containing between 0.55 and 20 mg/kg of existent inorganic sulfate, 4.0 to 20 mg/kg of potential inorganic sulfate, and 0.75 to 50 mg/kg of total inorganic chloride. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Reagent
Water Standard Practice for Applying
Statistical Quality Assurance and Control Charting Techniques to
Evaluate Analytical Measurement System Performance (Includes all
amendments and changes 12/12/2023). Standard Practice for Automatic Sampling
of Petroleum and Petroleum Products (Includes all amendments and
changes 3/24/2023). Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Ethanol as a Blending Component for
PetrolDetermination of Inorganic ChlorideIon Chromatographic Method
Available from International Organization for Standardization
(ISO), 1 rue de Varemb, Case postale 56, CH-1211, Geneva 20,
Switzerland, http://www.iso.ch. Standard Test Method for Existent
Inorganic Sulfate in Ethanol by Potentiometric Titration (Includes
all amendments and changes 12/25/2019). Standard Practice for Quality Management
Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing
Laboratories (Includes all amendments and changes 12/7/2023). Standard Test Method for Density,
Relative Density, and API Gravity of Liquids by Digital Density
Meter Standard Test Method for Analysis of
Engine Coolant for Chloride and Other Anions by Ion
Chromatography Standard Test Method for Determination of
Existent and Potential Sulfate and Inorganic Chloride in Fuel
Ethanol and Butanol by Direct Injection Suppressed Ion
Chromatography |
Historická
1.5.2014
Historická
1.10.2010
Historická
1.4.2011
Historická
1.3.2011
Historická
1.7.2011
Historická
1.6.2011
Poslední aktualizace: 03.11.2024 (Počet položek: 2 209 203)
© Copyright 2024 NORMSERVIS s.r.o.