ASTM D5422-09
ASTM D5492-10
ASTM D5499-94(2013)..
ASTM D5507-99(2012)..
ASTM D5523-10
ASTM D5538-13
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D7293-12
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
Automaticky přeložený název:
Standard Specification pro extrudované a lisované tvary Made z polyetherimid (PEI)
NORMA vydána dne 1.8.2012
Informace o normě:
Označení normy: ASTM D7293-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2012
Kód zboží: NS-38092
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D7293-12 :
Keywords:
PEI, polyetherimide, polyetherimide plates, polyetherimide rod, polyetherimide shapes, polyetherimide tubular bar, ICS Number Code 83.080.20 (Thermoplastic materials)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||
|
1.1 This specification covers requirements and test methods for the dimensions, workmanship, and the properties of extruded and compression-molded sheet, plate, rod and tubular bar manufactured from polyetherimide (PEI) resins. 1.2 The properties included in this specification are those required for the compositions covered. It is possible that other requirements will be necessary to identify particular characteristics important to specialized applications. These shall be specified by using the suffixes as given in Section 1.3 This specification does not allow for the use of recycled plastics (as defined in Guide D7209). 1.4 The values stated in English units are regarded as standard in all property and dimensional tables. For reference purposes, SI units are also included in 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
IEEE/ASTM SI-10
|
American National Standard for Use of the International System of Units (SI): The Modern Metric System
|
|
Standard Classification System for Specifying Plastic Materials
|
|
Standard Practice for Conditioning Plastics for Testing
|
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
|
Z1.4-1993
|
Sampling Procedures and Tables for Inspection by Attributes
|
|
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).
|
|
Standard Test Method for Tensile Properties of Plastics
|
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
|
Standard Terminology Relating to Plastics
|
|
Standard Practice for Packaging/Packing of Plastics
|
|
Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015) |
Podobné normy:
Historická
1.4.2009
Historická
1.8.2010
Historická
1.7.2013
Historická
10.10.2012
Historická
1.8.2010
Historická
1.5.2013
Doporučujeme:
EviZak - všechny zákony včetně jejich evidence na jednom místě
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
