Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D7168-11e1 15.5.2011 náhled

Doplňující informace

ASTM D7168-11e1

Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk (Includes all amendments And changes 11/10/2016).

Automaticky přeložený název:

Standardní zkušební metoda pro 99Tc ve vodě Solid Phase Extraction disk

NORMA vydána dne 15.5.2011

Jazyk
Provedení	PDF - okamžité stažení - 2 020.00 Kč Tištěné - 2 020.00 Kč
Dostupnost	SKLADEM
Cena	2 020.00 Kč bez DPH
2 020.00 Kč

Informace o normě:

Označení normy: ASTM D7168-11e1
Poznámka: NEPLATNÁ
Datum vydání normy: 15.5.2011
Kód zboží: NS-37742
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Zkoušení fyzikálních vlastností vody

Anotace textu normy ASTM D7168-11e1 :

Keywords:

disc, disk, liquid scintillation counting, radioactivity, radiochemistry, solid phase extraction, technetium, water, ICS Number Code 13.060.60 (Examination of water for physical properties)

Doplňující informace

Significance and Use

This method has not been evaluated for all possible matrices. Method suitability should be determined on specific waters of interest.

1. Scope

1.1 This test method describes a solid phase extraction (SPE) procedure to separate ⁹⁹Tc from environmental water samples (that is, non-process and effluent waters). Technetium-99 beta activity is measured by liquid scintillation spectrometry.

1.2 This test method is designed to measure ⁹⁹Tc in the range of approximately 0.037 Bq/L (1.0 pCi/L) or greater for a one litre sample.

1.3 The values stated in SI units are to be regarded as standard. Values given in parentheses are provided for information purposes only.

1.4 This method has been used successfully with tap water. It is the user's responsibility to ensure the validity of this test method for samples larger than 1 L and for waters of untested matrices.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.

2. Referenced Documents

D4448-01(2019)	Standard Guide for Sampling Ground-Water Monitoring Wells
D5847-22	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
D6001-05	Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D7282-21e1	Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements (Includes all amendments and changes 12/8/2022).
D7902-20	Standard Terminology for Radiochemical Analyses
D8026-16	Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
D1129-13(2020)e2	Standard Terminology Relating to Water (Includes all amendments and changes 2/14/2024).
D1193-06(2018)	Standard Specification for Reagent Water
D2777-21	Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
D3370-18	Standard Practices for Sampling Water from Flowing Process Streams