Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
Automaticky přeložený název:
Standardní zkušební metoda pro vyhodnocení vznětový motor olejů v T-11, recirkulace výfukových plynů vznětového motoru,
NORMA vydána dne 1.5.2013
Označení normy: ASTM D7156-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-37707
Počet stran: 35
Přibližná hmotnost: 105 g (0.23 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
diesel engine oil, exhaust gas recirculation, lubricants, soot, T-11 diesel engine, viscosity, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5.1 This test method was developed to evaluate the viscosity increase and soot concentration (loading) performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR. Obtain results from used oil analysis. 5.2 The test method can be used for engine oil specification acceptance when all details of the procedure are followed. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics in a diesel engine equipped with exhaust gas recirculation, including viscosity increase and soot concentrations (loading).2 This test method is commonly referred to as the Mack T-11. 1.1.1 This test method also provides the procedure for running an abbreviated length test, which is commonly referred to as the T-11A. The procedures for the T-11A are identical to the T-11 with the exception of the items specifically listed in 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exceptions—Where there is no direct SI equivalent such as screw threads, National Pipe Threads/diameters, tubing size, or where there is a sole source supply equipment specification. 1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Test Method for Pour Point of
Petroleum Products (Includes all amendments and changes
11/29/2022). Standard Test Method for Ramsbottom
Carbon Residue of Petroleum Products Standard Test Method for Cetane Number of
Diesel Fuel Oil Standard Test Methods for Flash Point by
Pensky-Martens Closed Cup Tester Standard Test Method for Distillation of
Petroleum Products and Liquid Fuels at Atmospheric Pressure
(Includes all amendments and changes 2/9/2024). Standard Test Method for Corrosiveness to
Copper from Petroleum Products by Copper Strip Test Standard Specification for Mineral
Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) Standard Test Method for API Gravity of
Crude Petroleum and Petroleum Products (Hydrometer/Method) Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids (and Calculation of
Dynamic Viscosity) Standard Test Method for Ash from
Petroleum Products Standard Test Method for Acid Number of
Petroleum Products by Potentiometric Titration (Includes all
amendments and changes 1/4/2019). Standard Test Method for Calculated
Cetane Index of Distillate Fuels (Includes all amendments and
changes 2/23/2023). Standard Test Method for Hydrocarbon
Types in Liquid Petroleum Products by Fluorescent Indicator
Adsorption (Includes all amendments and changes 9/14/2020). Standard Test Method for Oxidation
Stability of Distillate Fuel Oil (Accelerated Method) Standard Test Method for Cloud Point of
Petroleum Products and Liquid Fuels Standard Test Method for Sulfur in
Petroleum Products by Wavelength Dispersive X-ray Fluorescence
Spectrometry Standard Test Method for Water and
Sediment in Middle Distillate Fuels by Centrifuge Standard Test Method for Diesel Fuel
Diluent in Used Diesel Engine Oils by Gas Chromatography Standard Test Method for Density,
Relative Density, and API Gravity of Liquids by Digital Density
Meter Standard Terminology Relating to
Petroleum Products, Liquid Fuels, and Lubricants (Includes all
amendments and changes 12/21/2023). Standard Test Method for Sulfur in
Petroleum and Petroleum Products by Energy Dispersive X-ray
Fluorescence Spectrometry Standard Specification for Performance of
Active API Service Category Engine Oils (Includes all amendments
and changes 12/8/2022). Standard Test Method for Calculated
Cetane Index by Four Variable Equation Standard Test Method for Base Number
Determination by Potentiometric Hydrochloric Acid Titration Standard Test Method for Multielement
Determination of Used and Unused Lubricating Oils and Base Oils by
Inductively Coupled Plasma Atomic Emission Spectrometry
(ICP-AES) Standard Test Method for Determination of
Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel,
Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
(Includes all amendments and changes 8/13/2019). Standard Test Method for Evaluation of
Diesel Engine Oils in T-8 Diesel Engine Standard Test Method for Shear Stability
of Polymer Containing Fluids Using a European Diesel Injector
Apparatus (Includes all amendments and changes 6/16/2020). Standard Test Method for Determination of
Yield Stress and Apparent Viscosity of Used Engine Oils at Low
Temperature (Includes all amendments and changes 11/23/2020). Standard Test Method for Shear Stability
of Polymer-Containing Fluids Using a European Diesel Injector
Apparatus at 30 Cycles and 90 Cycles (Includes all amendments and
changes 12/28/2022). Standard Test Method for Evaluation of
Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel
Engine Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications |
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.