Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
Automaticky přeložený název:
Standardní praxe pro montáž a umístění Double-Twisted drátěné pletivo Gabiony a REVET Matrace
NORMA vydána dne 1.5.2010
Označení normy: ASTM D7014-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2010
Kód zboží: NS-37299
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
erosion control, gabions, lacing wire, lid closer, pre-formed cross ties, revet mattresses, ring fasteners, stiffeners, Assembly construction, Double-twisted wire mesh gabions/revet mattresses, gabions, Placement, Revet mattresses, ICS Number Code 13.080.05 (Examination of soil in general)
Significance and Use | ||||||
Gabions and Revet Mattresses, as described in Specification A975, are used to achieve soil stability and prevent soil erosion and are also used as retaining wall structures to resist movements due to gravity. Their ability to function properly depends on correct design and installation. This standard practice describes the proper installation of gabions and revet mattresses to ensure the products function as intended by the manufacturers. This practice offers a set of instructions for performing one or more specific operations and does not replace professional judgment. Not all aspects of this practice may be applicable in all situations. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. |
||||||
1. Scope | ||||||
1.1 This specification covers standard practice for assembly, placement and filling of double-twisted wire mesh gabions and revet mattresses used for various erosion control, soil retention or freestanding structures. The product size, type and alignment must be determined by the user. Gabions and Revet Mattresses shall be installed in accordance with project plans and specifications when available. 1.2 This standard is expressed in SI (metric) units. American (inch-pound) units are provided in parenthesis for information purposes. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.8.2013
Historická
15.10.2012
Historická
15.1.2013
Historická
1.10.2010
Historická
1.11.2006
Historická
1.4.2013
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.