Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D6984-05a

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine (Includes all amendments And changes 8/16/2017).

Automaticky přeložený název:

Standardní zkušební metoda pro hodnocení olejů Automotive motoru v pořadí IIIF , zážehového motoru

NORMA vydána dne 1.11.2005

Jazyk
Provedení	Online zabezpečené PDF - 2 879.30 Kč Tištěné - 2 879.30 Kč
Dostupnost	SKLADEM
Cena	2879.30 Kč bez DPH
2 879.30 Kč

Informace o normě:

Označení normy: ASTM D6984-05a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2005
Kód zboží: NS-37195
Počet stran: 47
Přibližná hmotnost: 141 g (0.31 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D6984-05a :

Keywords:

cam and lifter wear, deposits, engine oil, engine wear, high-temperature performance, oil consumption, oil thickening, oil viscosity, oxidation resistance, Sequence IIIF test, spark-ignition automotive engine, varnish, varnish deposition, ICS Number Code 75.100 (Lubricants, industrial oils and related products)

Doplňující informace

1. Scope

1.1 This test method covers an engine test procedure for evaluating automotive engine oils for certain high-temperature performance characteristics, including oil thickening, varnish deposition, oil consumption, as well as engine wear. Such oils include both single viscosity grade and multiviscosity grade oils that are used in both spark-ignition, gasoline-fueled engines, as well as in diesel engines.

Note 1—Companion test methods used to evaluate engine oil performance for specification requirements are discussed in SAE J304.

1.2 The values stated in SI or other units shall be regarded as the standard. The values given in parentheses are provided for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

G40-25a	Standard Terminology Relating to Wear and Erosion (Includes all amendments and changes 12/8/2025).
IEEE/ASTM SI-10	Standard for Use of the International System of Units (SI): The Modern Metric System
MIL-PRF-2104
D5453-25	Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
D5862-09	Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)
D6557-26	Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
D6593-18e1	Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Includes all amendments and changes 6/22/2022).
D6750-23	Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
D7320-18e1	Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine (Includes all amendments and changes 6/23/2022).
D4684-20a	Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature (Includes all amendments and changes 11/17/2020).
D4815-22	Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
D5185-26	Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D5191-22	Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
D5293-25	Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
D5452-23	Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
D235-22	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D240-25	Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D323-26	Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D381-25	Standard Test Method for Gum Content in Fuels by Jet Evaporation
D445-26	Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D525-12a(2025)	Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) (Includes all amendments and changes 12/24/2025).
D1319-25	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D2699-26	Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D86-23ae2	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 11/4/2024).
D130-26	Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D3237-22	Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D2700-26b	Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel (Includes all amendments and changes 7/13/2026).
D3231-25	Standard Test Method for Phosphorus in Gasoline
D3338-08	Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D3343-22	Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4175-24e2	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 6/9/2026).
D4485-24	Standard Specification for Performance of Active API Service Category Engine Oils
D7422-25	Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E191-64(1999)e1	Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
E608/E608M-24	Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E1119-23	Standard Specification for Industrial Grade Ethylene Glycol

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.