Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies (Includes all amendments and changes 6/18/2021).
Přeložit název
NORMA vydána dne 1.4.2021
Označení normy: ASTM D6796-21e1
Datum vydání normy: 1.4.2021
Kód zboží: NS-1029193
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ash, coal, coke, combustion residue, homogeneity, laboratory, moisture, oxidation, quality control,, ICS Number Code 75.160.10 (Solid fuels)
Significance and Use | ||||||||||||||||||||||||||||
5.1?The objective of this practice is to provide guidelines for the preparation of samples for interlaboratory studies to evaluate new test methods or for quality control purposes. 5.2?Samples prepared using these guidelines may be used for the testing of the precision and bias mandatory for ASTM test methods. Such an evaluation is necessary to provide guidance to the user as to the reliability of measurements that can be expected by its use. The statements are developed on the basis of user experience (ordinarily through interlaboratory studies) with the test method. 5.3?The availability of appropriate samples is a key requirement for interlaboratory studies. 5.4?The homogeneity of the sample produced for interlaboratory studies must be small enough so that the variance caused by the sample is small compared to the variance of the test being performed. |
||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||
1.1?This practice describes the essential activities that are required to produce samples for interlaboratory studies. 1.2?The suitability of a particular interlaboratory sample developed using this guide will depend on the tests being made. 1.3?UnitsThe values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.