Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
Automaticky přeložený název:
Standardní Příručka pro sběr teplotě vody, rozpuštěný kyslík, spojování, měrná elektrická vodivost a pH dat z otevřených kanálech
NORMA vydána dne 1.1.2013
Označení normy: ASTM D6764-02(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2013
Kód zboží: NS-36446
Počet stran: 16
Přibližná hmotnost: 48 g (0.11 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
dissolved oxygen, pH, sampling, specific conductance, surface-water, temperature, ICS Number Code 13.060.50 (Examination of water for chemical substances)
Significance and Use | |
5.1 This guide describes stabilization criteria for recording field measurements of Temperature, DO, SC, and pH. 5.2 This guide describes the procedures used to calibrate and check meters to be used in the field to records these measurements and the procedures to be use in the field to obtain these data. 5.3 This guide describes quality assurance procedures to be followed when obtaining cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels. Standard Direct Field Measurement |
Stabilization Criteria for
Measurements |
Temperature: |
|
Specific Electrical Conductance: |
|
pH: |
|
Dissolved oxygen: |
|
5.4 Field measurement must accurately represent the water flowing in the open channel being measured. Methods need to be used that will result in an accurate representation of the mean of the parameter of interest. Procedures must be used that will take into consideration the variation in the parameter across the sections and with depth.
5.5 Temperature and DO must be measured directly in the water in the open channel. SC and pH are often measured in situ, but also may be measured in a subsample of a composite sample collected using discharge-weighted methods.
1.1 This guide describes procedures to collect cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels.
1.2 This guide provides guidelines for preparation and calibration of the equipment to collect cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels.
1.3 This guide describes what equipment should be used to collect cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels.
1.4 This guide covers the cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of fresh water flowing in open channels.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
Standard Guide for Sampling Fluvial Sediment in Motion |
|
Standard Test Methods for Dissolved Oxygen in Water |
|
Standard Test Methods for pH of Water |
|
Standard Terminology Relating to Water (Includes all amendments and changes 2/14/2024). |
|
Standard Test Methods for Electrical Conductivity and Resistivity of Water |
|
Terminology for Fluvial Sediment |
|
Standard Test Method for pH Measurement of Water of Low Conductivity |
Historická
15.9.2010
Historická
1.12.2010
Historická
1.5.2010
Historická
15.6.2013
Historická
1.10.2009
Historická
1.3.2009
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.