Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D665-12
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
Automaticky přeložený název:
Standardní zkušební metoda pro Rust - Prevence Charakteristika inhibitovaná minerálního oleje v přítomnosti vody
NORMA vydána dne 1.11.2012
Informace o normě:
Označení normy: ASTM D665-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-36019
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D665-12 :
Keywords:
circulating oils, heavier-than-water fluids, hydraulic oils, inhibited mineral oil, rust-preventing characteristics, steam-turbine oils, ICS Number Code 75.080 (Petroleum products in general)
Doplňující informace
| Significance and Use | ||||||||||||||||
|
4.1 In many instances, such as in the gears of a steam turbine, water can become mixed with the lubricant, and rusting of ferrous parts can occur. This test indicates how well inhibited mineral oils aid in preventing this type of rusting. This test method is also used for testing hydraulic and circulating oils, including heavier-than-water fluids. It is used for specification of new oils and monitoring of in-service oils. 1.1 This test method covers the
evaluation of the ability of inhibited mineral oils, particularly
steam-turbine oils, to aid in preventing the rusting of ferrous
parts should water become mixed with the oil. This test method is
also used for testing other oils, such as hydraulic oils and
circulating oils. Provision is made in the procedure for testing
heavier-than-water fluids.
1.2 The values stated in SI units
are to be regarded as standard. No other units of measurement are
included in this standard.
1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for ASTM
Liquid-in-Glass Thermometers Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Test Method for Rust-Preventing
Characteristics of Steam Turbine Oil in the Presence of Water
(Horizontal Disk Method) Standard Specification for Reagent
Water Standard Specification for Steel Bar,
Carbon and Alloy, Cold-Finished Standard Classification of Industrial
Fluid Lubricants by Viscosity System Standard Test Method for Precipitation
Number of Lubricating Oils Standard Specification for Chromium and
Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications (Includes all
amendments and changes 11/7/2023). |
Doporučujeme:
