Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
Automaticky přeložený název:
Standardní testovací metoda pro stanovení Asphalt dým částic je v ovzduší na pracovišti je například benzen rozpustná frakce
NORMA vydána dne 1.10.2015
Označení normy: ASTM D6494-99(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2015
Kód zboží: NS-618071
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
air monitoring, asphalt fume, benzene soluble fraction, sampling and analysis, workplace atmospheres,, ICS Number Code 13.040.30 (Workplace atmospheres)
Significance and Use | ||||||||
5.1 Asphalt is a material used in the construction of roads and as a roofing material and sealant. 5.2 This test method provides a means of evaluating exposure to asphalt fume in the working environment at the presently recommended exposure guidelines. 5.2.1 The threshold limit value (TLV) for asphalt (petroleum) fumes is 5 mg/m3 8-h TWA, (1998 Threshold Limit Values and Biological Exposure Indices, ACGIH5.3 This procedure has been adapted from NIOSH Method 5023 (withdrawn prior to 4th edition (1994) and replaced in 1998 with NIOSH Method 5042) and OSHA Method 58 to reduce the level of background contamination providing better reproducibility. |
||||||||
1. Scope | ||||||||
1.1 This test method covers the determination of asphalt fume particulate matter (as benzene soluble fraction) and total particulate matter weight in workplace atmospheres using a polytetrafluoroethylene (PTFE) filter methodology. 1.2 This procedure has been adapted from NIOSH Method 5023 (withdrawn prior to 4th edition (1994) and replaced in 1998 with NIOSH Method 5042) and OSHA Method 58 to reduce the level of background contamination providing better reproducibility. 1.3 This procedure is compatible with high flow rate personal sampling equipment–0.5 to 2.0 L/min. It can be used for personal or area monitoring. 1.4 The sampling method develops a time-weighted average (TWA) sample and can be used to determine short-term exposure limit (STEL). 1.5 The applicable concentration range for the TWA sample is from 0.2 to 2.0 mg/m3. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For more specific precautionary statements, see Section 9. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.10.2015
Historická
1.11.2012
Historická
1.1.2012
Historická
1.4.2013
Historická
1.7.2013
Historická
1.4.2014
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.