Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
Přeložit název
NORMA vydána dne 15.2.2020
Označení normy: ASTM D6479-15(2020)
Datum vydání normy: 15.2.2020
Kód zboží: NS-985212
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Karosérie a součásti karosérie silničních vozidel
Textilní tkaniny
Keywords:
airbag, break force, edgecomb resistance, inflatable restraint,, ICS Number Code 43.040.60 (Bodies and body components), 59.080.30 (Textile fabrics)
Significance and Use | ||||||||||||||||
5.1 A measurement of a fabric's edgecomb resistance indicates the relative tendency of a fabric to pull apart under seam stress or similar action. The related concepts of yarn slippage and seam slippage are limited to sewn seams, whereas the measurement of edgecomb resistance is made at the edge of a cut part in the absence of a sewn seam. The absence of a sewn seam in this test method eliminates the effect that a particular stitch might have on the tendency of a yarn to slip near an edge of a cut part 5.2 This test method is useful for material design evaluations in such applications as airbags in which seam stress is a major concern. 5.3 This method may be used as a complement to Test Method D5822. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method covers the procedures for determining the resistance to edgecombing of a woven fabric used in inflatable restraints. 1.2 Procedures and apparatus other than those stated in this standard may be used by agreement of purchaser and supplier with the specific deviations from the standard practice acknowledged in the report. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Poslední aktualizace: 21.11.2024 (Počet položek: 2 206 478)
© Copyright 2024 NORMSERVIS s.r.o.