Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
Přeložit název
NORMA vydána dne 1.11.2016
Označení normy: ASTM D6298/D6298M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2016
Kód zboží: NS-668352
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
glass reinforcement, metal foil surface, modified bituminous sheet, styrene-butadiene-styrene (SBS), thermoplastic elastomer,, ICS Number Code 91.100.50 (Binders. Sealing materials)
1. Scope | ||||||
1.1 This specification covers fiberglass reinforced modified bituminous sheet materials that use styrene-butadiene-styrene (SBS) thermoplastic elastomer as the primary modifier and are surfaced with a factory applied continuous metal foil. These materials are intended for use in the fabrication of multiple ply roofing and waterproofing membranes and flashings. 1.2 This specification is intended as a material specification only. Questions regarding the suitability of the specific roof constructions or application techniques are beyond the scope of this specification. 1.3 The specified tests and property limits are intended to establish minimum properties. In place roof system design criteria such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, and others, are factors beyond the scope of this specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 The following precautionary statement pertains
to the test method portion only, Section 8 of this Specification:
Standard Terminology Relating to Roofing
and Waterproofing Standard Test Methods for Sampling and
Testing Modified Bituminous Sheet Material Standard Test Method for Cyclic Thermal
Shock of SBS-Modified Bituminous Roofing Sheets with
Factory-Applied Metal Surface |
Poslední aktualizace: 22.04.2024 (Počet položek: 2 895 429)
© Copyright 2024 NORMSERVIS s.r.o.