Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
Automaticky přeložený název:
Standardní Průvodce pro alkalické stabilizaci Čistírna odpadních vod zbytky
NORMA vydána dne 1.6.2011
Označení normy: ASTM D6249-06(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2011
Kód zboží: NS-34389
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
alkaline stabilization, biosolids, high-lime byproducts, sewage sludge, stabilization, wastewater treatment plant, Alkaline stabilization, High-lime byproducts, Residuals, Sewage sludge monitoring, Sludge, Wastewater testing/treatment, ICS Number Code 13.060.30 (Sewage water)
Significance and Use | ||||||
Operators of power and other plants producing alkaline by-products and wastewater treatment plant operators needing to treat and manage wastewater solids will find this guide helpful in dealing with their materials. This guide provides the tests, procedures, and parameters that should be considered to significantly reduce pathogens in wastewater treatment plant solids by the addition of manufactured or by-product alkaline materials (1). |
||||||
1. Scope | ||||||
1.1 This document provides guidance for use of reactive alkaline materials (quicklime, hydrated lime, high lime fly ash, or other byproducts) for treating wastewater solids (biosolids) to reduce pathogen levels and achieve compliance with regulatory requirements. Federal (40 CFR, Part 503) regulations for use or disposal of biosolids became effective on March 22, 1993; refer to USEPA regulations and guidance documents for information on other treatment processes or for specific requirements for use or disposal of biosolids. 1.2 Additional requirements may be imposed by individual states, and these are available through state regulatory agencies that issue permits for treatment and use or disposal, or both, of biosolids. 1.3 This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.5.2010
Historická
1.6.2011
Historická
1.1.2013
Historická
1.3.2011
Historická
1.5.2010
Historická
1.5.2010
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.