Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Přeložit název
NORMA vydána dne 1.11.2016
Označení normy: ASTM D6222/D6222M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2016
Kód zboží: NS-668349
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
atactic polypropylene (APP), modified bituminous sheet, polyolefin film, polyester reinforcement,, ICS Number Code 91.100.50 (Binders. Sealing materials)
1. Scope | ||||||||
1.1 This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric, with or without granules, that use atactic polypropylene (APP) as the primary modifier and are intended for use in the fabrication of multiple ply roofing and waterproofing membranes. Note 1: Many modified bituminous sheets are currently marketed
with polyester mat reinforced with glass yarns to improve
processing in the manufacture of the finished modified bitumen
product and to reduce distortions that may be introduced during
production. These glass yarns are typically a small percentage of
the reinforcement and do not contribute to the physical properties
of the finished product so much as to make these products be
classified by Specification D6223/D6223M.
1.2 This specification is intended as a material specification only. Issues regarding the suitability of specific roof constructions or application techniques are beyond the scope of this specification. 1.3 The specified tests and property limits used to characterize the sheet materials covered by this specification are intended to establish minimum properties. In-place roof system design criteria such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, the need for field applied coatings, and others, are factors beyond the scope of this material specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 The following precautionary statement pertains
only to the test method portion, Section 9, of this specification:
Standard Test Methods for Sampling and
Testing Modified Bituminous Sheet Material Standard Terminology Relating to Roofing
and Waterproofing Standard Specification for Atactic
Polypropylene (APP) Modified Bituminous Sheet Materials Using a
Combination of Polyester and Glass Fiber Reinforcements Standard Test Method for Low-Temperature
Unrolling of Felt or Sheet Roofing and Waterproofing Materials |
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 25.04.2024 (Počet položek: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.