Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
Automaticky přeložený název:
Standardní zkušební metoda pro měření se vyvinul formaldehydu z vody reducible Air-Dry Coatings
NORMA vydána dne 1.7.2014
Označení normy: ASTM D6191-97(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2014
Kód zboží: NS-34160
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
air-dry water reducible coatings, evolved formaldehyde, ICS Number Code 25.220.99 (Other treatments and coatings)
Significance and Use | ||
4.1 This test method measures the amount of formaldehyde that is released from a coating under laboratory conditions. The amount of formaldehyde available for release from a coating may vary depending on composition, and may decrease as the sample ages. 4.2 This test method may be used for typical air dried paints where water is the major volatile material. The useful range is estimated to be from 10 ppm to 1000 ppm formaldehyde in the sample. 4.3 Significant amounts of other volatile aldehydes, such as acetaldehyde, are reported to cause an interference with the determination of formaldehyde. This limitation is not expected to cause a problem for most common water reducible coatings. 4.4 Samples containing organic solvents as the major volatile component have not been evaluated and are not expected to be compatible with this test method. |
||
1. Scope | ||
1.1 This test method may be used to measure the amount of formaldehyde evolved from air-dry water reducible coatings utilizing latices, resin emulsions, or water reducible alkyds. The results may be used to define the “free” formaldehyde evolved from a sample under controlled laboratory conditions. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historická
1.6.2012
Historická
1.6.2013
Historická
15.6.2014
Historická
1.2.2009
Historická
1.6.2013
Historická
1.2.2010
Poslední aktualizace: 23.12.2024 (Počet položek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.