Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
Přeložit název
NORMA vydána dne 1.11.2018
Označení normy: ASTM D6053-14(2018)
Datum vydání normy: 1.11.2018
Kód zboží: NS-904523
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
electrical insulating varnish, VOC, volatile organic compound ,, ICS Number Code 29.035.60 (Varnished fabrics)
Significance and Use | ||||||||||||
4.1 This test method determines the volatile organic content of an electrical insulating varnish. It utilizes a procedure where dishes containing a known amount of varnish are baked and the amount of volatile organic compound is measured. Calculations are performed to express this in g/L or lb/gal. This test method is applicable to all types of varnishes. However, waterborne varnishes while baked under the same conditions need to have water content determined and calculations performed in accordance with Practice D3960. 4.1.1 During the cure of electrical insulating varnishes some organic material is volatilized. A determination of the amount that is volatilized is useful for estimating the amount of cured varnish on electrical units and volatile organic emissions from a manufacturing facility. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the determination of the amount of volatile organic compounds emitted during cure of electrical insulating varnishes. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.