Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D5973-97(2012) 15.7.2012 náhled

Doplňující informace

ASTM D5973-97(2012)

Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

Automaticky přeložený název:

Standardní specifikace pro elastomerní Strip těsnění s ocelovou Pojišťovací hrany Rails Používá se v Expansion spár

NORMA vydána dne 15.7.2012

Jazyk
Provedení	PDF - okamžité stažení - 1 504.20 Kč Tištěné - 1 504.20 Kč
Dostupnost	SKLADEM
Cena	1 504.20 Kč bez DPH
1 504.20 Kč

Informace o normě:

Označení normy: ASTM D5973-97(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 15.7.2012
Kód zboží: NS-33282
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Těsnění

Anotace textu normy ASTM D5973-97(2012) :

Keywords:
adhesive-lubricant, elastomeric, expansion joint, joint sealing, locking edge rails, preformed elastomer, strip seals, vulcanized elastomer, ICS Number Code 83.140.50 (Seals)

Doplňující informace

1. Scope

1.1 This specification covers the material requirements for preformed elastomeric strip seals and the corresponding steel locking edge rail used in expansion joint sealing. The scope of this specification is limited to preformed non-reinforced strip seals that mechanically lock into structural steel locking lugs. The sealing element can consist of a single layer strip or have multiple webs depending on individual project requirements. The structural steel locking edge rail shall be anchored into the structure in accordance with the purchaser's specific details. While the scope of this specification is limited to the materials used in fabrication of strip sealing systems, it is recommended that a practical means of testing the watertightness aspects of the individual systems either in the field or at a testing laboratory be developed. When used on highway bridges, limits on maximum joint opening and minimum steel thicknesses need to be addressed.

1.2 The values stated in the inch-pound system shall be considered as standard.

2. Referenced Documents

A36/A36M-19	Standard Specification for Carbon Structural Steel
D2628-91(2016)	Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
D1149-18	Standard Test Methods for Rubber Deterioration´Cracking in an Ozone Controlled Environment
D573-04(2019)	Standard Test Method for Rubber´Deterioration in an Air Oven
D518-99	Standard Test Method for Rubber Deterioration-Surface Cracking (Withdrawn 2008)
D471-16a(2021)	Standard Test Method for Rubber Property—Effect of Liquids (Includes all amendments and changes 6/25/2021).
D412-16(2021)	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D395-18	Standard Test Methods for Rubber Property´Compression Set
A588/A588M-19	Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A572/A572M-21e1	Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel (Includes all amendments and changes 6/16/2021).
FHWA	Technical Advisory T 5140.22 Uncoated Weathering Steel in Structures
D4070-15(2022)	Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures