Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
Automaticky přeložený název:
Standardní zkušební metody pro fyzické rozměry tuhého plastu vzorků
NORMA vydána dne 15.12.2011
Označení normy: ASTM D5947-11
Poznámka: NEPLATNÁ
Datum vydání normy: 15.12.2011
Kód zboží: NS-33150
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
caliper, dimensions, elastomers, micrometer, plastics, Caliper, Dimensions--plastic materials/applications, Elastomeric materials/applications, Micrometer measurement, Physical properties/dimensions/characteristics, Solid plastics, ICS Number Code 83.080.01 (Plastics in general)
Significance and Use | ||||||||||||
These test methods shall be used where precise dimensions are necessary for the calculation of properties expressed in physical units. They are not intended to replace practical thickness measurements based on commercial portable tools, nor is it implied that thickness measurements made by the procedures will agree exactly. |
||||||||||||
1. Scope | ||||||||||||
1.1 These test methods cover determination of the physical dimensions of solid plastic specimens where the dimensions are used directly in determining the results of tests for various properties. Use these test methods except as otherwise required in material specifications. 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—This standard and ISO 16012 address the same subject matter, but differ in technical content. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.4.2012
Historická
1.4.2010
Historická
1.4.2013
Historická
1.4.2011
Historická
1.11.2013
Historická
1.4.2010
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 03.05.2024 (Počet položek: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.