Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
Přeložit název
NORMA vydána dne 1.11.2017
Označení normy: ASTM D5931-13(2017)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2017
Kód zboží: NS-801039
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aqueous engine coolants, density, digital density analyzer, engine coolant concentrates, relative density,, ICS Number Code 17.060 (Measurement of volume, mass, density, viscosity), 47.020.20 (Marine engines and propulsion systems), 71.100.45 (Refrigerants and antifreezes)
Significance and Use | ||||||
5.1 Density is a fundamental physical property that can be used in conjunction with other properties to characterize engine coolant concentrates and aqueous engine coolants. 5.2 Determination of the density or relative density of these products is necessary for the conversion of measured volumes to volumes at the standard temperature of 20 °C (68 °F). |
||||||
1. Scope | ||||||
1.1 This test method covers the determination of the density or relative density of engine coolant concentrates and aqueous engine coolants. 1.2 This test method should not be applied to samples so dark in color that the absence of air bubbles in the sample cell cannot be established with certainty. 1.3 The accepted units of measure for density are grams per milliliter or kilograms per cubic meter. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||
2. Referenced Documents | ||||||
|
Poslední aktualizace: 29.04.2024 (Počet položek: 2 896 215)
© Copyright 2024 NORMSERVIS s.r.o.