Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D5798-15
Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
Automaticky přeložený název:
Standardní specifikace pro ethanol palivové směsi pro flexibilní - Fuel automobilových zážehové motory
NORMA vydána dne 1.10.2015
Informace o normě:
Označení normy: ASTM D5798-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2015
Kód zboží: NS-618062
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D5798-15 :
Keywords:
acidity, alcohol, automotive spark-ignition engine fuel, chloride, copper corrosion, E85, ether, ethanol fuel blends for flexible-fuel automotive spark-ignition engines, flexible-fuel, hydrocarbon, hydrocarbon blendstock, inorganic chloride, lead, MTBE, oxidation stability, oxygenates, pHe, phosphorus, solvent washed gum content, sulfur, vapor pressure, volatility, water,, ICS Number Code 75.160.20 (Liquid fuels)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the requirements for automotive fuel blends of ethanol and gasoline for use in ground vehicles equipped with ethanol fuel blend flexible-fuel spark-ignition engines. Fuel produced to this specification contains 51 to 83 volume % ethanol. This fuel is for use in flexible-fuel vehicles and is sometimes referred to at retail as “Ethanol Flex-Fuel.” Appendix X1 discusses the significance of the properties specified. 1.2 The vapor pressure of ethanol fuel blends is varied for seasonal climatic changes. Vapor pressure is increased at lower temperatures to ensure adequate flexible-fuel vehicle operability. Ethanol content and selection of hydrocarbon blendstock are adjusted by the blender to meet these vapor pressure requirements. 1.3 This specification formerly covered Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines, also known commercially as E85. The nomenclature “fuel ethanol” has been changed to “ethanol fuel blends” to distinguish this product from denatured fuel ethanol Specification D4806. To facilitate blending of ethanol fuel blends that meet seasonal vapor pressure requirements, a new lower minimum ethanol content has been established. 1.4 The United States government has established various programs for alternative fuels. Many of the definitions of alternative fuel used by these programs may be more restrictive than the requirements of this specification. See 4.1.2.1 for additional information on alternative fuels containing ethanol. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 The following safety hazard caveat
pertains only to the test method portion, 8.1.8, of this specification.
Standard Specification for Denatured Fuel
Ethanol Standard Test Method for Acidity in
Volatile Solvents and Chemical Intermediates Used in Paint,
Varnish, Lacquer, and Related Products Standard Test Method for Vapor Pressure
of Gasoline and Gasoline-Oxygenate Blends (Dry Method) Standard Test Method for Vapor Pressure
of Petroleum Products and Liquid Fuels (Mini Method) Standard Test Method for Determination of
Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel,
Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence Standard Test Method for Determination of
Ethanol and Methanol Content in Fuels Containing Greater than 20 %
Ethanol by Gas Chromatography (Includes all amendments and changes
1/3/2025). Standard Test Method for Water in Organic
Liquids by Coulometric Karl Fischer Titration United States Code of Federal
Regulations, SAE 2007–01–4006 Standard Specification for Automotive
Spark-Ignition Engine Fuel Standard Test Method for Corrosiveness to
Copper from Petroleum Products by Copper Strip Test Standard Practice for Mixing and Handling
of Liquid Samples of Petroleum and Petroleum Products Standard Test Methods for Copper in
Water Standard Test Method for Phosphorus in
Gasoline Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Terminology Relating to
Petroleum Products, Liquid Fuels, and Lubricants (Includes all
amendments and changes 6/9/2026). Standard Practice for Automatic Sampling
of Petroleum and Petroleum Products (Includes all amendments and
changes 3/24/2023). Standard Practice for Aviation Fuel
Sample Containers for Tests Affected by Trace Contamination Standard Test Method for Acidity in
Ethanol and Ethanol Blends by Titration (Includes all amendments
and changes 5/4/2022). Standard Test Method for Water Using
Volumetric Karl Fischer Titration Standard Test Method for Determination of
pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends Standard Test Method for Sulfur in
Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel
Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength
Dispersive X-ray Fluorescence Spectrometry Standard Test Method for Determination of
Existent and Potential Sulfate and Inorganic Chloride in Fuel
Ethanol and Butanol by Direct Injection Suppressed Ion
Chromatography Standard Test Method for Determination of
Existent and Potential Inorganic Sulfate and Total Inorganic
Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample
Injection Standard Test Method for Determination of
Corrosiveness to Silver by Automotive Spark-Ignition Engine
Fuel—Thin Silver Strip Method Standard Test Method for Corrosiveness to
Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip
Method Standard Test Method for Silicon in
Gasoline and Related Products by Monochromatic Wavelength
Dispersive X-ray Fluorescence Spectrometry Standard Test Method for Gum Content in
Fuels by Jet Evaporation Standard Test Method for Oxidation
Stability of Gasoline (Induction Period Method) (Includes all
amendments and changes 12/24/2025). Standard Test Method for Distillation of
Petroleum Products and Liquid Fuels at Atmospheric Pressure
(Includes all amendments and changes 11/4/2024). |
Doporučujeme:
