Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
Automaticky přeložený název:
Standardní zkušební metoda pro semikvantitativní Micro stanovení kyseliny Počet mazacích olejů při oxidaci testování
NORMA vydána dne 15.5.2011
Označení normy: ASTM D5770-11
Poznámka: NEPLATNÁ
Datum vydání normy: 15.5.2011
Kód zboží: NS-32466
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
acid number, color indicator titration, oxidation testing, semiquantitative: Acid number--petroleum products, Lubricating oils, Oxidation testing--petroleum products, Semiquantitative determination, Used lubricating oils, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Significance and Use | ||||||||||
This test method provides a semiquantitative estimate of the acid number of lubricating oils obtained from laboratory oxidation tests using smaller amounts of sample than Test Methods D 974, D 664, or D 3339. It has specific application in Test Method D 943 and in Test Method D 4871. This test method, therefore, provides a means of monitoring the relative oxidation of lubricating oils by measuring changes in acid number, at different time intervals and under various oxidizing test conditions. Since this test method is semiquantitative, each laboratory shall develop its own criteria for each oxidation test method for determining when to switch from this semiquantitative test method to a more precise test method for acid number. |
||||||||||
1. Scope | ||||||||||
1.1 This test method is a semiquantitative micro method intended for monitoring the changes in acidic constituents occurring in lubricating oils during oxidation testing, when the acid number of such oils falls within the range from 0.02 to 1.0 mg of potassium hydroxide per gram of sample. It is applicable to such oils as turbine oils, hydraulic oils, and other circulating oils. Note 1 - This test method is a micro version of Test Method D 974 and it produces results similar to that method. 1.2 This test method is designed for use where sample size is limited. It shall not be used as a replacement for higher precision methods such as Test Methods D 974 or D 664. It shall not be used to monitor oils in-service. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.1.2011
Historická
1.6.2009
Historická
1.12.2011
Historická
1.5.2011
Historická
1.7.2010
Historická
1.5.2013
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.