Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
Automaticky přeložený název:
Standardní zkušební metoda pro povrchovou pevnost spoje dřevo-základní Fiber a částic Panel materiálů
NORMA vydána dne 1.8.2013
Označení normy: ASTM D5651-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2013
Kód zboží: NS-32037
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
adhesive, bond quality, fiber, medium-density fiberboard, particle, particleboard, surface, surface bond strength, ICS Number Code 83.180 (Adhesives)
Significance and Use | ||||
3.1 This test method provides a measure of the bond quality of the fibers, or particles, at the surface of wood-base fiber and particle panel materials including particleboard, medium-density fiberboard (MDF) and oriented strand board (OSB). Surface bond strength is a measure of the strength and resistance to delamination of the bond between overlay materials and panel surfaces and is an important consideration when these overlay materials, such as wood veneers, saturated papers, or plastic overlays, are to be bonded to the panel surface during secondary manufacturing. |
||||
1. Scope | ||||
1.1 This test method is a measure of the cohesive bond strength of the fibers, or particles, on the surface of wood-base fiber and particle panels (for example, particleboard and medium-density fiberboard) in the direction perpendicular to the plane of the panel. 1.1.1 To determine the internal cohesive bond strength of wood-base fiber and particle panels, use Section 11 of Test Methods D1037. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.10.2008
Historická
1.4.2011
Historická
1.4.2010
Historická
1.10.2012
Historická
1.6.2012
Historická
1.3.2014
Poslední aktualizace: 29.11.2024 (Počet položek: 2 209 895)
© Copyright 2024 NORMSERVIS s.r.o.