Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D5501-12

Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

Automaticky přeložený název:

Standardní testovací metoda pro stanovení obsahu ethanolu a methanolu v palivech která obsahují více než 20 % ethanolu plynovou chromatografií

NORMA vydána dne 1.11.2012

Jazyk
Provedení	Online zabezpečené PDF - 1 991.10 Kč Tištěné - 1 991.10 Kč
Dostupnost	SKLADEM
Cena	1991.10 Kč bez DPH
1 991.10 Kč

Informace o normě:

Označení normy: ASTM D5501-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-31471
Počet stran: 13
Přibližná hmotnost: 39 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM D5501-12 :

Keywords:

E85, denaturant, denatured, ethanol, ethanol concentration, fuel ethanol, gas chromatography, methanol, ICS Number Code 75.160.20 (Liquid fuels)

Doplňující informace

Significance and Use

5.1 This test method provides a method of determining the percentage of ethanol in an ethanol-gasoline fuel blend over the range of 20 to 100 mass% for compliance with fuel specifications and federal or local fuel regulations.

5.2 Ethanol content of denatured fuel ethanol for gasoline blending is required in accordance with Specification D4806.

5.3 Ethanol content of ethanol fuel blends for flexible-fuel automotive spark-ignition engines is required in accordance with Specification D5798.

1. Scope

1.1 This test method covers the determination of the ethanol content of hydrocarbon blends containing greater than 20% ethanol. This method is applicable to denatured fuel ethanol, ethanol fuel blends, and mid-level ethanol blends.

1.1.1 Ethanol is determined from 20 mass% to 100 mass% and methanol is determined from 0.01 mass% to 0.6 mass%. Equations used to convert these individual alcohols from mass% to volume% are provided.

1.2 This test method does not purport to identify all individual components common to ethanol production or those components that make up the denaturant or hydrocarbon constituent of the fuel.

1.3 Water cannot be determined by this test method and shall be measured by a procedure such as Test Method D1364 and the result used to correct the concentrations determined by this method.

1.4 This test method is inappropriate for impurities that boil at temperatures higher than 225°C or for impurities that cause poor or no response in a flame ionization detector, such as water.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E594-96(2026)	Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
D4626-23	Standard Practice for Calculation of Gas Chromatographic Response Factors
D4307-17(2021)	Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
D4175-24e2	Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants (Includes all amendments and changes 6/9/2026).
D4057-22	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D1364-22	Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
D1298-24	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D5798-25	Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
D5599-22	Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
D4815-22	Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
E203-24	Standard Test Method for Water Using Volumetric Karl Fischer Titration
D6792-25	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
D6299-26a	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance (Includes all amendments and changes 8/4/2026).
E1510-95(2021)	Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
E1064-24	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
D4806-25	Standard Specification for Denatured Fuel Ethanol
E355-96(2021)e1	Standard Practice for Gas Chromatography Terms and Relationships (Includes all amendments and changes 4/28/2021).

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.